compression
15+ Year Contributor
- 1,433
- 11
- Dec 9, 2004
-
vero beach,
Florida
i dont know why my posts are always doubled.. And is that expensive? ive never rented... But it costs nothing but the first fill and first month rent.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
-16 bungs welded on an AFCO radiator
how did you keep them concentric while you welded them?
I came across this thread on another forum. welding porn on page 2
For those who apreciate a good challenge Pt2
Aluminum bung welded in and tapped to M16x1.5 for the factory radiator fan switch
You must be logged in to view this image or video.
An inconel exhuast manifold for a DSM?
That I would like to see. But why over 304 SS?
An inconel exhuast manifold for a DSM?
That I would like to see. But why over 304 SS?
My buddy Todd and I recently tag-teamed this topmount for my buddy Dan's PTE6262 on his 1G. We used Treadstone's cast SS flange and collector, which are very nice pieces. The design is pretty unique with the wastegate up high and on the inside, but it fits well there because it will offer a nice transition when re-circ'd back into the downpipe.
My buddy Todd and I recently tag-teamed this topmount for my buddy Dan's PTE6262 on his 1G. We used Treadstone's cast SS flange and collector, which are very nice pieces. The design is pretty unique with the wastegate up high and on the inside, but it fits well there because it will offer a nice transition when re-circ'd back into the downpipe.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.