The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

2g TSI part out

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Scoobystyl

10+ Year Contributor
277
1
Nov 5, 2011
Denver, Colorado
I have a 95 talon tsi awd, let me know what you need off of it.
Blacked out tail lights and headlights
Fully wire tucked harness (fuse box is wired to the air bag compartment)
Fludyne aluminum radiator
6 bolt bare block (virgin)
6 bolt crank (virgin)
7 bolt engine (rod knock)
1g ported head +1 valves (never got around to finishing it but if someone wants it i will, can come with ferrea valves and kiggly springs)
1g transmission (broken shift fork)

Doors are trash (windows and motors are good)
Front fenders are trash
I threw most of the interior in the dumpster

Would be good for an awd swap!
 
The shell is fine but i did replace the quarter panel and cut the front radiator support off to tube it and welded it back on but not selling I'm just going to scrap it, prob 500 for the harness i paid 300 for the spare so I could have the same color wires on everything I extended

Ill explain the harness tomorow also on what's there and what's been deleted
 
How much for te shell? I don't need the wires or anythings I just want the trans back to the rear sub frame(spyder AWD convertion).
 
Not selling the shell, I could sell you everything you'd need for the swap other than transmission
 
That is cool, I need everything from the same car. Matching the splines and all are a pain to try and part together... Looking for a parts car in a whole for it. Thanks though....
 
They would all be matching splines from the rear end to the transfercase,axles etc and any 2g transmission would work, it would all be coming off of this exact car, im just keeping the shell itself
 
The gearing from the T case hase to be the same as the trans the 95-96 has differnt gearing and Spain count then the 96-99. Without the trans and T case from the same car it would not be correct gearing and would cause excessive stress in the drive train. So just the rear end and drive shaft and I will look for the trans and t case apart... So just for the rear end, drive shaft, hangers and gas tank with bolts and all how much?
 
lsd Rear end, rear subframe, drive shaft, hangers and gas tank- $600 and if you need axles i have them also
 
How much for the axles? I can fix a boot easily. Did Albanator already reserve the parts he was asking for? I'd be interested ina few of them if (only if) he backs out since he asked first.
 
Axles 200 for both. He hasn't claimed them yet so there still whomevers.

Radiator 150
Crank 200
The trans came from a 91
 
Hey spyder that is good looking out but I passed on all of the parts Lille 2 weeks ago. Go get the stuff you need. I wound up getting a whole parts car with a bunch of other things on it, But I do need the drive shaft hangers Front and back that are spot welded on....I took the ones off this car and the wife trashed them while we were cleaning up from the tare down so yeah. How much for those things?
 
The driveshaft bearings? or do you need just that top part thats tack welded onto the chasis?
 
But I do need the drive shaft hangers Front and back that are spot welded on....

He said what he needed.
I might have a set as well. Not sure though.
Try scooby first since he probably has them.
 
Ah yes he did... Good catch. $10 if you bring everything to take them off or $20 if you need me to.
 
Where are you located again? If your close I will take them off but if not I will just shoot you the 20
 
I am not sure where that is? I am in Colorado Springs. How far are you from there?
 
Centennial/Parker is about 20-30 minutes from castle rock if that gives you a better idea.
 
Right youd be looking at just under an hour from colorado springs
 
Okay well if you pull them off I will give you the 20. Just shoot me your address... Looking at Saturday morning when I would be picking them up
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top