The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Register Log in
Please Support STM Tuned
Please Support STM Tuned

Spyder Sub Enclosure

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I am going to build an inclosure to fit under the top for 1-2 10s, one day that is. Sound systems are not a priority for me these days.
 
I built my own a couple years back. Used 3/4" mdf. built it for a single 15" sub. its a tight fit but definitely helps if you take out all the plastic panels. Very little trunk space left though LOL
 
i got a regular 12 inch box in the trunk os my spyder works just fine allthough i had to take off all the interior trim for it to fit. but is a pain in the butt to take it out :rocks::rocks::hellyeah::hellyeah::rocks::dsm:
 
My first post here....

I built a sealed box that fits between the seat and trunk, under the storage area for the top.

It's a tight fit, but it holds a JL 13TW5 sub, that driver is very low profile and doesn't need much airspace at all.

I don't have a picture, but suffice it to say that it doesn't need a picture. Open the trunk, and there is nothing there to see. The amps are also hidden in that area as well.
 
Yes, it does warrant a picture. I have heard of plenty of people put this on their wish list, but few actually do it. At this time, I haven't seen it done.

It is on my to-do list in the next few weeks once I get my roll bar in. I need to figure out how I'll work around that, then build a box under the bag.
 
I built a box for a 2001 eclipse spyder. Fit one 10w3. It fit perfect under the top area and left the whole trunk space open still.
 
ubp_sanity said:
My first post here....

I built a sealed box that fits between the seat and trunk, under the storage area for the top.

It's a tight fit, but it holds a JL 13TW5 sub, that driver is very low profile and doesn't need much airspace at all.

I don't have a picture, but suffice it to say that it doesn't need a picture. Open the trunk, and there is nothing there to see. The amps are also hidden in that area as well.
Click to expand...

This is exactly what I need to do so pictures if you can please :pray:
 
Also built one for a 94 bmw 325i convertible. It was a blow through box that ported through the spot between the back seat. It slams!
 
You must log in or register to reply here.

Similar threads

Sub enclosure?
Replies
15
Views
760
98SilverGS-T
Sub enclosure?
Replies
13
Views
956
Nikita
Patter$on
good sub enclosure for a spyder trunk
Replies
5
Views
750
tkrPerformance
tkrPerformance
Sub Enclosure finished!
Replies
13
Views
1K
VOTBLINDUB
93Lzr
1g sub enclosure ideas.
Replies
19
Views
6K
mcre8iv
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top