TWOpointFORliter
10+ Year Contributor
- 644
- 120
- Jul 31, 2009
-
Crown Point,
Indiana
I fiinally got my dsm up to Boostin Performance for some time on their mustang dyno today. Right off the street it was running really lean. Since the car had sat all winter after a summer of driving on E85 Devin suggested I have my injectors cleaned and flow tested. He has the equipment in house to do it so off came the injectors and in under an hour my injectors were flowing like new and the rollers where spinning again. My car had been street tuned by Boostin last summer and the first pull off the street netted 407/470@27psi. My long time goal had been 400awhp and before the tuning even started I had already reached my goal and needless to say everyone was surprised at the torque numbers. Next we upped the boost and did another pull. This time it made 411/492@29psi. Again the torque numbers were just amazing. We felt the turbo didn't have much HP left in it but decided to up the boost and shoot for 500 torque. The final pull of the day was 422/502@31psi. I was speechless. This car is an absolute torque monster and spools the turbo instantly on the street. There is nothing special about this turbo just and off the shelf E16G with the optional porting and flapper mod done that I have been running for the last 5 years. I also am using the FP 4" intake that is suppose to hurt flow to the turbo.
I really don't think there is anything left in this turbo so I plan on having some fun this summer and then finally getting the hx35 installed this winter.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
I really don't think there is anything left in this turbo so I plan on having some fun this summer and then finally getting the hx35 installed this winter.