balance shaft cutting?

zachwilliams02 · Apr 29, 2013

Hi I'm doing my engine rebuild on my gsx but I live in cny so it is rusted to hell and back. long story short my parents are giving me money for a car and they want my pos or as I call it my belovid dsm out of the garage because it never runs.I was wondering why can't I just cut the balance shaft on the oil pump. Won't that do the same thing as putting in a new stubby shaft. I'm selling the car as soon as I finish the engine rebuild. So I'm trying to save on cash.

pauleyman · Apr 29, 2013

You can but you have to block off the rear of the shaft as oil flows through it. Many people have done exactly that.

Steve93Talon · Apr 29, 2013

People have cut the stock shaft down and plugged the hole at the end, but it's only $13 for a stub shaft from JNZ.

donniekak · Apr 29, 2013

Steve93Talon said:
People have cut the stock shaft down and plugged the hole at the end, but it's only $13 for a stub shaft from JNZ.

Yes, but you can make a stub shaft in 10 minutes, it takes a week to get one in the mail.

jrdrew5 · Apr 29, 2013

I cut mine off tapped the hole found a bolt and cut the bolt off after it bottomed out took all of 10mins instead of 3-5 days. Lol

CSFX8588 · Apr 30, 2013

Not a bad idea. I'd find a friend with a lathe and see if you could knock the rust off with some sandpaper and keep it within spec. Define "to hell and back"

combs-dsm · May 1, 2013

Theres plenty of options. I just ordered the 14$ mirage stub shaft and installed it. Make sure to block the oil holes on the rear balance shaft. And port you OFH due to your going to have higher oil pressure as well.

zachwilliams02 · May 1, 2013

what i was talking about with the rust is the car its self. the rockers are completely gone. i can put my hanjd through it in the rear wheel wells and all under the car where the pinch weld is is almost completely rusted away. sheet metal and a welder.

The Top DSM Community on the Web

balance shaft cutting?

zachwilliams02

pauleyman

Steve93Talon

donniekak

jrdrew5

CSFX8588

combs-dsm

zachwilliams02

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds