The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Fuel Injector Clinic

TalonDave raises the bar in 2013 - 9.20 @ 154.32; 60mm HX40

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Congrats Dave very well done on the old diesel turbo :hellyeah:
 
Big secret if you highlight below....

Holset's font is "Pepsi". The guy who does my decals made it in literally 30 seconds by typing "Holset" in caps and outlining it.

HAHA ROFL

Great now to have one made in the size i want, now to just figure out what size. LOL
 
Congrats Dave im psyched to see people pushing holset turbos to the next level and proving they are a great turbo for dsms!! I hope to put down some good times this summer on my hx35 set up ive been building.
 
Man that was a nice pass....Can you tell us a little on how you got the car so lite..? My gutted, caged 1g- still is a pig at 2950 ..
 
I want a 160mph just as bad as a 8s pass, but yeah definitely gonna be a tough one for that! Just sucks I picked up so much more speed in the 1/8th but only 3mph in the 1/4 with being almost 500lbs lighter. Time for some aerodynamics done to the car... my mirror deletes are on their way, next payday ill order the front bumper shutters. Going to frontline this weekend to make some rear defusers for the bumper!

Just imagine putting a 67mm on that thing....

Call up Curt Brown for bearings. They helped him quite a bit.
 
Holy pozole!

Smoking fast on that HX40! Well done gents!
 
Holy crap! Inspiring!
 
Dave, wifey, Justin and Ricky make one hell of a team!
Good stuff.
 
Last edited:
Dave, Justin and Ricky make one hell of a team!
Good stuff.

Yeah definitely, probably couldn't have done it without them! Also add my wife to the team, definitely couldn't have done it without her! She even clicked in my hood pins for the first pass.

That 9.20 pass was on 37 psi and 70 lbs/min, so once I get the new built tcase in we're going to up the boost to 42 psi, and hope for the best!:sneaky:
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top