The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

things i did to my dsm in southern california today.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Got the GST running after realizing that some douche put the wrong plugs in. Oh it fires now, awesome.
 
Didn't do it today but here goes anyways. Bought ecmlink finally and tinted my windows
 
installed my new Turbosmart Race Port BOV and ultragate 45 wastegate. I installed my steering column. I installed the new clutch master cylinder. I am almost ready to go fast again.
 
Finished my clutch cut for no lift to shift today :D
 
Washed my car last night and I cleaned my headlights today/night. Drill died on me so it will charge over night and I'll post pictures of before/after.

You must be logged in to view this image or video.


What the headlights look like at night. This is clean they're. They shine at night.
 
Last edited:
Made 320/270 HP/TQ at 17 psi today revving to 7k. What are you guys redlining to on stock valve springs?
 
Gofer i already did my brakes i have brembo rears that are rebuilt and hawk pads with power slot rotors and gsx fronts rebuilt, and with hawk pads, and power slots rotors in frontalso running blue racing brack fluid, i found that my moto for building my car was getting dangerous on the streets! (my moto while building my car was go fast and worry about braking after the run)
 
Nobody's done anything lately? Or is it all top secret :ninja:

I washed her and told her she'd get her new parts on soon :)
 
I did Nothing. But I did buy parts to go into it (1g:talon:). I have a few more parts to buy but here's the list. MHI bastard 20g, Hafe exhaust manifold w/38mm waste gate & screamer pipe, Evo3 intake manifold, Evo 3 cylinder head w/internals, Evo 3 O2 housing, FP2 272 cams, Wally 255 w/entire Aeromotive Fuel setup, Lucas 1200cc injectors, Fmic w/Greddy Bov, rebuilt 6 bolt shortblock- 8.3:1 Wesco pistons, Manley rods, ACL race barrings, polished OEM crank, BSE Kit installed, Water pump, Oil pump., Rebuilt Tre Transmission Stage 2, prothane motor mounts, Competition Flywheel, Stage 3 Spec clutch Kit.:thumb: I have a few more things to get but that's pretty much it. I have no idea what hp goal i'm pushing for. I guess it'll be whatever I comes out to be. For some reason I can't post anymore pictures or I would. For the most part. I'm officially Broke LOL.... Stay tuned.
 
Man! I wish I had some elves build my car randomly. I'd be in the game. What's up munk..
 
If you buy my spare crap then maybe they will migrate to your garage too I know think a few ended up in the dumpster as not much has goten done. Im not sure if its too cold or if they are feeding on old kitty litter.
 
Lmao... what spare crap you got? I knw I'm a kick myself in the ass for asking. curiosity always kills the cat....
 
February 9th - Went to the junkyard on 50% off and bought a Tranny to swap onto the RS. It still has yet to be swapped in LOL... Warranty ends in March 9th. Yes I know. Fail!!!

You must be logged in to view this image or video.





February 23rd - I bought a 1995 Eagle Talon TSi FWD 5 speed for $1350.

You must be logged in to view this image or video.


You must be logged in to view this image or video.


February 23rd - I paid $60 to get it towed to my Bro Mikes house since I don't have enough space at my house at the moment. DSM Forums - View Profile: KyDSM


Over these 2 weeks I have ordered parts and bought parts off friends. I have every single part to get the car running minus the hotside. Turbo Lab is lagging to ship my hotside.


I found a guy selling the 1g BOV set up for a 2g $25 shipped.
Bought a few parts off of Rock auto, STM Tuned, and JNZ tuning.
Bought a evo 3 hotside, but that yet has to be shipped...
My bro Sal, sold me his 16G Evo turbo that he bought off of Kris. ** DSM Forums - View Profile: destruckeclipse **



March 2nd - My bro Mike and Sal helped me work on the engine! Yanking shit apart and adding things LOL...


You must be logged in to view this image or video.


You must be logged in to view this image or video.




Last piece to get the car running is the HOTSIDE!!! :nono: :cry: :ohdamn: :notgood:
 
Last edited by a moderator:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top