The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

Eclipse to Talon Conversion Questions

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Before the track closed for the season and I hadn't done any mods besides my bcs restrictor removal and my exhaust. I ran a 9.63. That was running 14"s on the front, a bad trans, and the back seats removed. I was really happy it did that. I have a video from the night in an earlier post. I ran like a 9.7 that run and was racing my buddy's sr20 swapped 200sx that things been gutted like a fish too LOL.

That's really good considering it was mostly stock!

My best was 9.3 although my car was running like ass. Hitting fuel cut and only able to go 1/2-3/4 throttle all the way down the track.

Just found out this past weekend that the engine coolant temp sensor I have was swapping around since the day I bought my car was a 1G sensor. :nono:

Swapped it when I put my 1G top end on, swapped it when I put my 6 bolt long block in it. It plugged in so I never really thought about it. Over the weekend I was looking through the engine bay and seen the sensor. I was like "That isn't a 2G sensor..."

This explains so many of my problems LOL.

By the time the season comes back around, I should definitely be in the 8's. I have gotten so many issues resolved since my last visit to the track.
 
Well your copying skills are still pretty good. :p

bwahaha that hurts.... I'm sorry I'm so jelly of your car I have to make a replica of it! ROFL

That's really good considering it was mostly stock!

My best was 9.3 although my car was running like ass. Hitting fuel cut and only able to go 1/2-3/4 throttle all the way down the track.

Just found out this past weekend that the engine coolant temp sensor I have was swapping around since the day I bought my car was a 1G sensor. :nono:

Swapped it when I put my 1G top end on, swapped it when I put my 6 bolt long block in it. It plugged in so I never really thought about it. Over the weekend I was looking through the engine bay and seen the sensor. I was like "That isn't a 2G sensor..."

This explains so many of my problems LOL.

By the time the season comes back around, I should definitely be in the 8's. I have gotten so many issues resolved since my last visit to the track.

That is my main problem right now, I'm hitting fuel cut bad. So its just driving like a normal person for the time being. I'm rewiring my stock fuel pump and putting in my 650cc injectors here soon. Also getting Link v3. My tubular mani should be here soon so it's going on today as well.

And I found my boost leak, sealer I used on my 1g bov didn't hold for long. at all. LOL. And I think I'm going to have to return my mbc, it doesn't seem to be functioning properly.
 
Until you get an itch to make it even more like mine. Then you'll switch to a 14b. LOL

You got a point. Because I wanna be just like you. Next is the awd and vin # swap ROFL. I started working on painting my spare valve cover today, hopefully I can get it done and installed before I go to work tomorrow. I bet you'll never guess the color scheme Corey :p

And I also installed my tubular header yesterday, I like it a lot so far, it just looks mean.
You must be logged in to view this image or video.
 
You got a point. Because I wanna be just like you. Next is the awd and vin # swap ROFL. I started working on painting my spare valve cover today, hopefully I can get it done and installed before I go to work tomorrow. I bet you'll never guess the color scheme Corey :p

And I also installed my tubular header yesterday, I like it a lot so far, it just looks mean.
You must be logged in to view this image or video.

please I hope its not white with red lettering since thats the color i chose to do mine which is halfway done LOL. Wanna see pics!
 
You got a point. Because I wanna be just like you. Next is the awd and vin # swap ROFL. I started working on painting my spare valve cover today, hopefully I can get it done and installed before I go to work tomorrow. I bet you'll never guess the color scheme Corey :p

And I also installed my tubular header yesterday, I like it a lot so far, it just looks mean.
You must be logged in to view this image or video.

:hmm: I wonder what the color scheme will be...
 
:hmm: I wonder what the color scheme will be...

black and red of course LOL
I tried it an it came out horrible, so I'm just going to get it powdercoated in a few weeks

please I hope its not white with red lettering since thats the color i chose to do mine which is halfway done LOL. Wanna see pics!

I actually considered doing that, but white is hard to keep clean.
 
black and red of course LOL
I tried it an it came out horrible, so I'm just going to get it powdercoated in a few weeks



I actually considered doing that, but white is hard to keep clean.

well i clear coated mine with a few coats so its pretty much just spray and wipe for me. heres what it came out to
You must be logged in to view this image or video.
 
Last edited by a moderator:
Guess what Corey? Boom clear markers! LOL.

You must be logged in to view this image or video.


I also put a yellow film on my fog lights the other day.
You must be logged in to view this image or video.
 
I have smoked ones on mine. I don't like the yellow foggers though.

They're just a film so I can peel em off. I think they'll look better when the car is painted. But if not I can just peel it off. The car looks awful right now. Its snowed the past two weeks so theres salt all over my car. :(
 
Guess it's a good thing I live in San Diego! No snow!!!! .__.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top