The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

1075awhp 3000gt ATX

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

The exact factory stroke length is 85.8mm. How much did take off from the original 74 deck height? Even at 83.9mm stroke thats a 3.346L
 
The exact factory stroke length is 85.8mm. How much did take off from the original 74 deck height? Even at 83.9mm stroke thats a 3.346L

i really don't know where you going. I don't have the exact file next to me maybe 84.xx. what's the differences?... i also told you that was bit under 3.4L

NBF
 
No difference.. I was just curious of the specs on the motor.

You ever sell the 3.6? I know you had it listed for awhile..


Your best of a 6g74 is:
6g74 stock crank, billet rods and piston stock bore and you are done.
Now you have a bad ass 3.49L short block.

NBF
 
this car is an intertesting build for sure. trapping 169 is crazy good on the auto.

what was 60 ft on that run? it looks like you didnt even try to launch? 2.8 60 ft?
what converter does this car run?
 
What was the deal with this car at the shootout?

this car is an intertesting build for sure. trapping 169 is crazy good on the auto.

what was 60 ft on that run? it looks like you didnt even try to launch? 2.8 60 ft?
what converter does this car run?

I think most of this was already explained here.... ;)
My best was [email protected] with 2 sec 60f LOL the nitrous was not working and we couldn't fix it there . i will fix it this week and go to a local track for 2 full runs before i do the full check up on the car for the WCF in november.
 
Will you guys still be bringing this car to WCF? I'd love to see what it would do coming out of the hole w/ some power.
 
Will you guys still be bringing this car to WCF? I'd love to see what it would do coming out of the hole w/ some power.

Yes , we will be there. She launches much better now with the nitrous on the 2 step i guess she has no choice now LOL.

NBF
 
If I had Nelsons budget I'd be in the 8s.
 
Most likely. Got a few friends that have experience with building cars with power in Nelsons range. I do what I could.

I most certainly wouldn't parade myself around as fastest 3000GT when im not. Even if I was I wouldn't go on every major car forum stating so when I have no business being on those forums...
 
Wow this is a fun thread! A guy with a 14 second car is trying to talk shit to a guy with a 1000+ HP car!
Don't sweat it Nelson, the guys who know their stuff appreciate the posts and info you put up in this thread, keep up the good work. I don't know if I speak for everyone, but us guys with fast cars want to see you go even faster.
 
I just dislike his attitude towards most people

Love the car itself.. But I think it should go more like 8.8 or faster not 9.18
 
I just dislike his attitude towards most people

Love the car itself.. But I think it should go more like 8.8 or faster not 9.18

LOL, you have no clue. Cars with real power take quite a bit of time to dial in, especially when Nelson went from a manual trans to an auto and needs to figure out a helluvalot more variables to make it consistent.

It is a serious car and has alot of potential still on the table. Give it time.

As well as the statement that you dislike his attitude; well, actual attitude in person normally differs than internet attitude. Especially when dealing with shittalkers on a regular basis. Do you know Nelson in person, or simply as what you see on a forum?


Keep this thread clean; and keep the whining/shittalking over on 3si.org.
 
Yup, it's sooooo easy to go 7s just because you have some money. SMDH. I'll play, how much money does it take to go 7s when you haven't gone 13s yet?
 
Nelson has been at this for years... People with less HP have faster times.

IM not a drag racing type. I prefer road course, autox and of course fun on the street because we all do it. Nelson himself said he built his car to be a street monster. Obviously it's gone away from that but it use to be a very serious street machine.

I would like to see a 3/a run low 8s or 7s or 6s

Don't see it happening tho.

I honestly would like to see a 4g63 in a 3/s.. Probably be best in a fwd.
 
Wow this is a fun thread! A guy with a 14 second car is trying to talk shit to a guy with a 1000+ HP car!
Don't sweat it Nelson, the guys who know their stuff appreciate the posts and info you put up in this thread, keep up the good work. I don't know if I speak for everyone, but us guys with fast cars want to see you go even faster.

exactly...car has my respect ( i was leary when you first popped up i'll admit, but i think you've stated your self well enough at this point that you've caught mysupport and interest as well)

Now just ignore the haters, be proud of your car and post it where you feel like posting it. if people don't wanna see it they can always not click on the thread IMO :D

keep us updated on how things progress for 2013 !!!!!!!! :thumb
 
Nelson has been at this for years... People with less HP have faster times.

IM not a drag racing type. I prefer road course, autox and of course fun on the street because we all do it. Nelson himself said he built his car to be a street monster. Obviously it's gone away from that but it use to be a very serious street machine.

I would like to see a 3/a run low 8s or 7s or 6s

Don't see it happening tho.

I honestly would like to see a 4g63 in a 3/s.. Probably be best in a fwd.

So??? Why don't you do it yourself? no money, guess what go find yourself some income producing activities because posting here is not gonna make you money...

You cant effort to be on a forum right now...
 
When my motor goes I will probably drop in a 4B but no need too currently.
Money is an issue but only limits me.. IM just out for fun. There is always someone faster.

I focus I'm the street as my car sends most of it's time there.

I do little extra welding and fab to find my car habits
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top