The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Resolved 98 ecu, 97 engine into 95 body

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Aramane

10+ Year Contributor
57
0
Jun 24, 2010
Des Moines, Iowa
I'm swapping my 97 engine with a flashable 98 ecu into my new 95 shell (97 got t boned). What do I need to do with the wiring for the cam angle sensor, injectors or firing order?
 
Solution
No wire swapping, but you might want the CAS pigtail from the 97+ so that the harness will reach the other side of the head and plug into the newer CAS. The 98 ECU expects the same signal that the 97 CAS outputs and all of the wiring should be correct just by matching colors with the existing plug and the newer pigtail.
No wire swapping, but you might want the CAS pigtail from the 97+ so that the harness will reach the other side of the head and plug into the newer CAS. The 98 ECU expects the same signal that the 97 CAS outputs and all of the wiring should be correct just by matching colors with the existing plug and the newer pigtail.
 
Solution
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top