bump
15+ Year Contributor
- 46
- 1
- Apr 30, 2008
-
eagar,
Arizona
Hi,
First off im still an amature to all of this and here i go...
My car is mostly stock with cheap bolt on's (im a family guy with a low income)
ebay tdo5 20g, header, turbo back 3'' exhaust, mbc set @ 14psi, new seals on tb, hard icp stock cooler, prothane mounts, bs eliminated, ps and ac removed, mmcd logger, narrow band christmas show guage, boost guage, fuel pump rewire, new injector seals. timing set @ 5 degrees
dyno: super flow windyn v2.6
whp;218.6@ 5800rpm (fwd car)
wtrq; 219.6@ 4700 rpm
heres the scary part: 30 counts of knock @ 6718 rpm.
injd 74.2% o2-r .80v tima 11 degrees
i was standig next to the engine when it was being ran and didt hear any pining of the sort. i get alot of phantom knock a low rpm
i ran 91oct with some oct booster for the dyno thinking it would help.
on the log the knock count started @ 3750 rpm 8 counts back down to 3@ 5700rpm and up to 20 counts 2 6300rpm drops to 18 6000 then shot up to 30 @ 67k
where the header is bolted to the turbo got cherry red but still didnt hear audible knocking.
im looking for some constructive criticism from the wise
and i have $300 to spend just dont know what to get (advive please)
thank you
First off im still an amature to all of this and here i go...
My car is mostly stock with cheap bolt on's (im a family guy with a low income)
ebay tdo5 20g, header, turbo back 3'' exhaust, mbc set @ 14psi, new seals on tb, hard icp stock cooler, prothane mounts, bs eliminated, ps and ac removed, mmcd logger, narrow band christmas show guage, boost guage, fuel pump rewire, new injector seals. timing set @ 5 degrees
dyno: super flow windyn v2.6
whp;218.6@ 5800rpm (fwd car)
wtrq; 219.6@ 4700 rpm
heres the scary part: 30 counts of knock @ 6718 rpm.
injd 74.2% o2-r .80v tima 11 degrees
i was standig next to the engine when it was being ran and didt hear any pining of the sort. i get alot of phantom knock a low rpm
i ran 91oct with some oct booster for the dyno thinking it would help.
on the log the knock count started @ 3750 rpm 8 counts back down to 3@ 5700rpm and up to 20 counts 2 6300rpm drops to 18 6000 then shot up to 30 @ 67k
where the header is bolted to the turbo got cherry red but still didnt hear audible knocking.
im looking for some constructive criticism from the wise
and i have $300 to spend just dont know what to get (advive please)
thank you