The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Rix Racing

Kiggly adapter question.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

goodbuds

10+ Year Contributor
1,044
7
Nov 10, 2009
oceanside, California
I have read into this, but seems some what confusing. My question is do I need to acquire the small spacer that goes between the bolts and the adapter. Not the kiggly spacer but the oem one that comes from a auto 6 bolt engine. Again I'm talking about the small oem spacer with 6 holes and goers directly behind the bolts.
And if I need it were can I find one.
 
nobody knows?

From the factory there is one in front and one behind the flex plate I believe. In the Kiggly instructions, it only shows you putting one on top and the flex plate goes right up against the crank.
 
You can get them from JNZ tuning, that's where I got mine. Kiggly directions show 1 that goes on between the plate and bolts.

Also make sure you check clearance between the flex plate and rear main seal housing as well as the oil pan. I needed to clearance some of the pan as well just to give me a bit more comfort room.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top