The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

91 tsi awd 9.99sec build

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Thanks gabytech

I seriously havnt seen my car since ive gutted it. Super busy with work once the motor is done ill try n wrap in up in 3 days with a bunch of friends working along with me and get a tranny after every things done. Realy trying to make my july/august dead line
 
Just got in from picking up this baby from a friend who just acquired a evo8 and got rid of his rx7 175+toll haha. I wont even attempt to rebuild it my self or clean it.
ImageUploadedByTapatalk1339912343.755044.jpg
4a65720d-70b8-b2d8.jpg
ImageUploadedByTapatalk1339912390.821207.jpg
ImageUploadedByTapatalk1339912406.838359.jpg
can you say billet!
ImageUploadedByTapatalk1339912428.272767.jpg


No blade damage just a shit load of grease!!
 
Last edited by a moderator:
Awesome build man!

hey thanks ive got my pistons ill upload pics later, there made for evos 10.5-1 cr so on a dsm head it will be 10-1 cr. it took 1 month for me to get them from dsmraveyard / thedsmgraveyard and i still havent gotten my rods yet realy realy holding my build up. also im should be picking up a more street friendly shell that belonged to a friend and already has a 4bolt lsd rear in it. rave blue ^_^ :thumb::sneaky::applause:

ill also be making my jumper harness for a 1g-evo8 ecu already have most of what i need. when i get the shell im going to cut the doors completely in the black one put some lexan on it maybe the hatch too and use it for races .
 
Build is looking good! Subscribed for more updates. Keep it up.:thumb:
 
Looking good!!

Ill have more pics nxt week car is going to the builder in a day or two . Simply no time to do it my self. Fml .haha . But i kno the car will not be as fast as i want it to be just because ill be running stock rims with some decent tires and a unbuilt tranny .

just bought gsc s3 and a tial v-44 , and teh maperformance 2000cc injectors ^_^ immm sooo stocked i payed way less than what there listed as bnib . check them out MAP 2000cc High Impedence Fuel Injectors w/ PnP Adapters (Mitsubishi Evo & DSM) - Modern Automotive Performance

i cant justify id2000 for 1000$ or fic. now the prices have plummeted because of maperformance / map haha. good job guys.
 
have you mounted your FMIC yet? Any way you can get me a few pics?
 
ImageUploadedByTapatalk1344787312.213576.jpg
ImageUploadedByTapatalk1344787327.745347.jpg
ImageUploadedByTapatalk1344787340.396492.jpg


Ended up costing me 300 bucks in towing alone! 24 for toll and 25 for gas fml that money could have baught parts haha . From now on build will be fast pace . Trying to make it to import shootout at etown
 
Last edited by a moderator:
I too have the MAP rods pushing some 10.5:1 slugs around! I think i was equally impressed by the box they showed up in as i was the rods themselves. LOL!

Was cool to see that they are mfg. by Howards here in WI . Hooray!

Good build btw.
 
I too have the MAP rods pushing some 10.5:1 slugs around! I think i was equally impressed by the box they showed up in as i was the rods themselves. LOL!

Was cool to see that they are mfg. by Howards here in WI . Hooray!

Good build btw.

Thnx i got manley tt! Killer deal couldnt refuse . My builder is at the buschur shoot out so yea when he comes back the machine shop and him should be back up !
 
ImageUploadedByTapatalk1345835764.880009.jpg
ImageUploadedByTapatalk1345835786.804778.jpg

Only thing i wish maperformance did differently was put dead times on the sheet and show flow up to 100psi .
But im over all impressed with the packaging and shipping speed!
 
Last edited by a moderator:
Im not the person to normally rant publicly but i seriously wish i was out west with the dsm heads. These dam urban new yorkers make no sense and have soooo little faith in my build. Im one of few people that will disclose what combos i put on my car and what exactly im doing to my car because i hope i can inspire someone or give ideas. Hanging with people i share the same passion with shoudnt come with o no you cant run 9s or you cant make 700hp or your gonna blow your motor up if you tune it.just because they havnt or cant. Yea im no big name tuner but i have a 10sec 600hp evo under my belt another 600hp evo and my previous 520hp dsm (pump 93) under my belt ,( that people i hang with raided my car and no one saw shxt and i parted out what i could.) those cars are still running with my tune along with other high 300 low 400 hp evos . To me reading is knowledge and every info i can take in and apply to my build i do. I hope that when i do the numbers i do i dont have a swarm if fake fan boys running behind me . Id be dam if i dump 10k$ in the car so far and cant even run 10s according tho them.

Thanks for following my thread my bottom end should be done end of the week so pics coming soon. Being so busy with work trying to get this promotion has been really holding things up
 
Ive been researching auto tranny and i think its my best bet since the car is going to be tracked. I need something consistent and easy on the pockets .... From not breaking drive train parts alot. You see my set up in post one all you guys that run autos low 10s and mid-high 9s please put you imput in what i should consider going with . Nothing more than a 50shot if i cant escape using juice
 
Last edited by a moderator:
Im not the person to normally rant publicly but i seriously wish i was out west with the dsm heads. These dam urban new yorkers make no sense and have soooo little faith in my build. Im one of few people that will disclose what combos i put on my car and what exactly im doing to my car because i hope i can inspire someone or give ideas. Hanging with people i share the same passion with shoudnt come with o no you cant run 9s or you cant make 700hp or your gonna blow your motor up if you tune it.just because they havnt or cant. Yea im no big name tuner but i have a 10sec 600hp evo under my belt another 600hp evo and my previous 520hp dsm (pump 93) under my belt ,( that people i hang with raided my car and no one saw shxt and i parted out what i could.) those cars are still running with my tune along with other high 300 low 400 hp evos . To me reading is knowledge and every info i can take in and apply to my build i do. I hope that when i do the numbers i do i dont have a swarm if fake fan boys running behind me . Id be dam if i dump 10k$ in the car so far and cant even run 10s according tho them.

Thanks for following my thread my bottom end should be done end of the week so pics coming soon. Being so busy with work trying to get this promotion has been really holding things up

Always remember "haters going to hate, but real g's will be happy for ya" keep up the good work
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top