The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

replace lifters with stock?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

boosted 96 eclipse

10+ Year Contributor
104
0
Aug 4, 2012
Cheyenne, Wyoming
So i have a really bad lifter tick.the guy i bought the car from said that the engine was rebuilt but the guy put 3g lifters on one side and 2g lifters on the other. Should i go with all 2g or 3g lifters? Where can i get the lifters without going through the dealer? It's a 96 Gst
 
I've got a set used of EVO VIII/IX lifters from the classifieds on EvolutionM.net, switching to solid lifters appears to be a common modification among EVOs so every now and then a used set will pop out for cheap. You would be obviously taking a risk, who knows what the real reason for updating them was in the first place, so the usual precautions are to be taken (check the seller feedback, ask proper questions etc.), but they can be found cheap. I did clean them as per the several youtube videos on the subject you can find out there and installed them, the ticking was gone for good.
 
I got my TopLine on eBay for $90 shipped brand new.
So far so good with about 12k miles and I know 3 other people using them.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top