Well I just installed a new act flywheel and an ebay XTD stage 3 clutch. Problem now is that it doesnt want to shift in 5th or reverse. It goes 1 - 4 without problems but 4th is all the way to right where reverse goes. Before all this happened the trans worked good besides 1st gear grind. Ive checked the cables and are good but when I play with the shifter lever, you have to force it in to get into reverse and 5th wont go in at all.(cables not connected)

Please help. I'm lost and very tired. Ive been working on the car for 2weeks straight just to get it running. Original problem was I melted a piston and just finished doing a full rebuild.

Here you go, try this. Shifter Adjustment

And give me some freaking reputation point seeing as I am now on thin ice apparently?

That wasnt the problem and already figured it out. thanks tho.

What was the problem because I'm having the same issue.

Check your reverse switch on top of the trans there should be a washer under it. Take it out then try putting it in gear.

check your reverse sensor, if it doesnt have a washer underneith it needs one, as per sheptrans.

^Yeah what they said, that was the problem with mine

mark thread as resolved.