fastnelson
10+ Year Contributor
- 148
- 2
- Aug 3, 2008
-
Floral Park,
New_York
Went to the dyno today to test some new fuel and this thing is unreal the way it makes the power at 25psi went 1075awhp like nothing we did try a lot of tomes to try to get her down but at 25 like we start they were all at the same 1075 range spinning the shit out of the tires.
I think i have everything where i want it now and I would be at dsm shoot out this year and crank this bi*** up. there's was no vibration or anything, everything is smooth now. There's more 35 psi to go so we will see.
The motor revs like a bike to 11k , on the video you only see a little but you can see clear how fast it revs to 9500 , the rev cut is set to 11k.
it was to hot in the room 101 degree and that's in those conditions that i like to test it, the motor was at 175 psi temp ( with thermostat)all the time coming down to 165 after the runs , the oil pressure was at 139psi pressure after 5k rpms , the transmission was 195psi temp on the runs and coming down to 175/180 after it.. we did 12 runs only .
NBF 1074awhp 3000gt ATX 1 - YouTube
NBF 1074awhp 3000gt ATX 2 - YouTube
NBF
I think i have everything where i want it now and I would be at dsm shoot out this year and crank this bi*** up. there's was no vibration or anything, everything is smooth now. There's more 35 psi to go so we will see.
The motor revs like a bike to 11k , on the video you only see a little but you can see clear how fast it revs to 9500 , the rev cut is set to 11k.
it was to hot in the room 101 degree and that's in those conditions that i like to test it, the motor was at 175 psi temp ( with thermostat)all the time coming down to 165 after the runs , the oil pressure was at 139psi pressure after 5k rpms , the transmission was 195psi temp on the runs and coming down to 175/180 after it.. we did 12 runs only .
You must be logged in to view this image or video.
You must be logged in to view this image or video.
NBF 1074awhp 3000gt ATX 1 - YouTube
NBF 1074awhp 3000gt ATX 2 - YouTube
NBF