The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

Checklist for 16 install

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Aramane

10+ Year Contributor
57
0
Jun 24, 2010
Des Moines, Iowa
So i'm undertaking a 16g install on my 2g and I was wondering if I had all the stuff rounded up that I need to get.

I have:
SS oil feed line with 14b bolts
14b oil return line
14b j pipe
AEM Wideband
Injen Intake
Walbro 255
650 FIC injectors
Aeromotive AFPR
Manual boost controler
3 in turbo back Magnaflow exhaust
Aftermarket boost gauge.
Small 16g
FMIC and piping
98 ecu with tactrix 2.0

I'm just wondering what random gaskets bolts and any other major parts I need to complete this


Thank you for your time
 
When I did mine I got stomp at the last part.
Installing the turbo to the oil return line. I used the stock t25 bolts but it wouldn't fit into the evo16g turbo. I just ghetto ridge it until I went to the store.
But there's tons of information on the forum you're miss by not reading it.
It's a good experience, have fun.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top