The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

More Engine Clean up PICS

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wickedz

10+ Year Contributor
736
4
Dec 12, 2009
Madison, Wisconsin
Got me a new oil cap ;-)

You must be logged in to view this image or video.



My TiAL wastegate BEFORE

You must be logged in to view this image or video.


My TiAL wastegate AFTER :)

You must be logged in to view this image or video.


Manifold comes tomorrow, so I will be ready to install this waste gate. I also have new Exhaust studs and nuts coming in tomorrow, and Tuesday my new 4 layer exhuast gasket. Not too bad of progress. I always think, its the little detail that makes it more :thumb:
 
Oil cap is a nice touch... and the wastegate looks good as well. It's all in the details.
 
Here is some more update on the talon

Sitting in her spot, getting all done up with new upgades
You must be logged in to view this image or video.


New Manifold came in today
You must be logged in to view this image or video.

You must be logged in to view this image or video.


Will install it this weekend. I'm expecting my 4 layer copper gasket Saturday, and my new studs and nuts came today also.

That is all for now. Waiting for more parts to arrive like always :)


You must be logged in to view this image or video.

You must be logged in to view this image or video.
 
You must be logged in to view this image or video.
 
You must be logged in to view this image or video.
 
didnt want to work too long today because its my bday, and im feeling lazy LOL. Here are some more updates

I got the fuel pressure gauge in the other day. Well it hit the regulator, so I had to find a way to extend it so I hope this holds up.

You must be logged in to view this image or video.


Got some more hoses hooked up and the new SS raidator hose dress kit.

You must be logged in to view this image or video.



money shot :)

You must be logged in to view this image or video.
 
AND she is ALIVE. Yes its so nice to hear it run again LOL. However MASSIVE leak under the intake manifold somewhere. Now to figure that out, and tune it, and boost it
 
You must be logged in to view this image or video.


Still have a long way to go but I have alot of the excess wiring and tubing cleaned up. Cruise control has been deleted among a few other things. I'm anxious to get in and redo the plumbing for the FMIC and the coolant.

to give you an idea of how far it's come..

You must be logged in to view this image or video.

A stock 1996 RT/TT
 
Last edited by a moderator:
didnt want to work too long today because its my bday, and im feeling lazy LOL. Here are some more updates

I got the fuel pressure gauge in the other day. Well it hit the regulator, so I had to find a way to extend it so I hope this holds up.

You must be logged in to view this image or video.


Got some more hoses hooked up and the new SS raidator hose dress kit.

You must be logged in to view this image or video.



money shot :)

You must be logged in to view this image or video.
how you get the fuse box like that..anymore close up pics?
 
Well I didn't want to get this setup, but I had to run a catch can. I obviously didn't want some homemade setup, so I got a budget friendly setup. I HATE that it has clear blue tubes, but at this point with my 2 weeks notice in and money tight, I will have to rock it this way for a bit.

You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top