Yes that is ported.

Is 60 bucks a reasonable price for it?

That's an ok price. I usually see them in the 40-50 shipped range. Just make sure that it isn't cracked.

Yea but you should try for $50.

Alright, i will probably go take a look at it. I will look for any cracks. Are there any common areas that it might crack at, so i can make sure there are none.

The ported outlet of the 2g manifold should be around 53 mm..

KCz Eclipse said:

Are there any common areas that it might crack at, so i can make sure there are none.

Click to expand...

Ive mostly seen them cracked in the collector area where the divider is. Its been cracked all the way through to the outside in the middle of the 4 bolt pattern area.

I cracked the shit out of my auto manifold.On top an bottom of the runners were cracked pretty good.

The collector was pretty bad too.

That one's not cracked, but it's on its way. They all crack. Eventually.

That divider has a crack extending all the way to the runner, and as it heats and cools, it works like a muscle and eventually cracks through the outer housing. Looking at the outer housing, it's not cracked yet. You're better off with an EVO manifold. They're cast much thicker and are already 7cm.