The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Morrison Fabrication

Ebay Exhaust New???

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

You have to check and see if the hangers are in the right place. measure the stock ones
 
Make sure it is for an AWD. I know it probably is considering it is advertised for a GSX, but it does not hurt to make sure.

I have a SRS on my GS-T. It rattles at idle. I believe that is because I connected the hangers to the bushings under the car correctly. When I first got it, it made no noise while the hangers were attached to the middle of the rubber bushing/hangers.

If it for an AWD, then it should fit perfectly.
 
Last edited:
You have to check and see if the hangers are in the right place. measure the stock ones
 
You have to check and see if the hangers are in the right place. measure the stock ones
 
I used 2 different ebay brands and they bolted right up. I dont think youll have a problem
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top