The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

Holy Melted Wires Batman!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PurpleHazel

10+ Year Contributor
118
2
May 21, 2011
St. Louis-ish, Illinois
Guy brought these in at work and plopped them down on the front counter and asked us to test his starter. OMG

He put the wrong starter on his truck (took some bad advice from someone else, felt bad for him). No further damage, if you can believe it.

You must be logged in to view this image or video.
 
I was putting in a sub/amp for a customer who asked me to check his tail light fuse while I was under the dash. Found a burnt fuse and replaced it with the equivalent. Tested everything out system wise and was about to send him on his way when smoke started pouring out from under the dash. Turns out that the fuse I put in there was made out of unobtanium and refused to blow (there was a short in the tail light wires).

I had to remove the harness from the car, looked much like the one in the picture. 8 hours later I had it all straightened out and re-wrapped. Got everything working again but his damn tail lights. What a freaking nightmare.
 
LOL that's funny, goes to show consult a professional first if your not sure what your doing!

Depends on where you take it. I went to a local Advanced Auto Parts. I asked the kid at the counter if he could look up what oil my Subbie takes and how much. The retard couldn’t work the computer; had no idea what to do next. He then looks at me and goes “A Subaru? How many cylinders?” I told him 4. He replies “You need 10w-30 and it takes 4 quarts.” When I asked him how he knew that he got all defensive and said “I AM AN ASE CERTIFED MECHANIC, I WORK ON THIS STUFF ALL THE TIME.”

I was all WTF. Who guesses on oil capacity.
 
depends on where you take it. I went to a local advanced auto parts. I asked the kid at the counter if he could look up what oil my subbie takes and how much. The retard couldn’t work the computer; had no idea what to do next. He then looks at me and goes “a subaru? How many cylinders?” i told him 4. He replies “you need 10w-30 and it takes 4 quarts.” when i asked him how he knew that he got all defensive and said “i am an ase certifed mechanic, i work on this stuff all the time.”

i was all WTF. Who guesses on oil capacity.

respect my authoritawww.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top