shifting noise

96eclipsegsx56 · Mar 28, 2012

I have a 95 tsi and when I'm driving and I press in the clutch and hit the gas it makes a click noise...like the cable is grabbing it or something...what could this be...I have shep stage 2 tran with centerforce dual friction clutch..aluminum flywheel...

fonzi90Tsi · Mar 28, 2012

The clutch pedal clicks?
Pedal assembly might be worn.

Try this. Push pedal to the floor, let it come up. Then wait like 5 seconds and giveit a light pull with your foot. If it has any play it needs to be replaced.

supermario300hp · Mar 28, 2012

+1 on that. check and replace

96eclipsegsx56 · Mar 29, 2012

The pedal doesn't click...it sounds like transmission or something...even if I'm in cruise control...if i go down hill and then smooths out when it goes from coasting to gear again it like tugs...makes clink noise...like shifter cable Idk...

jed344 · Mar 29, 2012

could the clicking noise be from a worn out Throw out bearing?

Ozone302 · Mar 29, 2012

jed344 said:
could the clicking noise be from a worn out Throw out bearing?

Usually the throw out bearing makes noise only when the clutch isn't pressed and goes away when it is pressed. I don't think it's a TOB.

Ozone302 · Mar 29, 2012

So it makes the noise when the clutch pedal is pressed and you hit the gas while it's pressed? Or it makes the noise when you press either pedals?

96eclipsegsx56 · Mar 29, 2012

It makes the noise after clutch is pressed like when I give it gas and it grabs u kno...even in cruise control like I said if the car is coasting then its given gas it clicks...

rcarbajal4 · Mar 29, 2012

96eclipsegsx56 said:
It makes the noise after clutch is pressed like when I give it gas and it grabs u kno...even in cruise control like I said if the car is coasting then its given gas it clicks...

So its when you accelerate, not necessarily when you let off the clutch right?

96eclipsegsx56 · Mar 30, 2012

correct

Ozone302 · Mar 30, 2012

Exhaust leak?

96eclipsegsx56 · Mar 31, 2012

No exhaust leaks...

Seriph · Mar 31, 2012

What about the rear subframe bushings.

96eclipsegsx56 · Apr 1, 2012

Hmm ill have to check

96eclipsegsx56 · Apr 7, 2012

ok i looked under my hood a couple days ago and the shifter cable slips right off the bushing?? so i bought new aluminum ones maybe install tomoro...see what time it is when i get out of work...hopefully this fixes it...

96eclipsegsx56 · Apr 16, 2012

that didnt fix it...any oher ideas?

The Top DSM Community on the Web

shifting noise

96eclipsegsx56

fonzi90Tsi

supermario300hp

96eclipsegsx56

jed344

Ozone302

Ozone302

96eclipsegsx56

rcarbajal4

96eclipsegsx56

Ozone302

96eclipsegsx56

Seriph

96eclipsegsx56

96eclipsegsx56

96eclipsegsx56

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds