Hey Everyone!!! I am new to site.. I just wanted to inform everyone about an all Mitsubishi meet/bbq at Younker Mitsubishi in Renton on Saturday, June 30, 2012. It will be from 12PM-5PM.. Everyone is welcome to come but lot parking is limited. Please help me spread the word!!! Also feel free to hit me up if you have any questions or anything like that!

http://www.facebook.com/events/247372068688146/

sounds interesting...you guys have a huge movie theater parking lot across the street correct?

never been to a meet sponsored by a dealership, id think about attending if you guys were giving deals on OEM equipment.. even if its DSM oil filters

urbansmoker1 said:

sounds interesting...you guys have a huge movie theater parking lot across the street correct?

Click to expand...

Yes! We will be able to use that parking lot also. Our actual lot parking is for Mitsubishi/DSM vehicles.. We will be clearing out our lot even our showroom for this event.. We are working out special pricing for everyone who shows up!! Please feel free to invite EVERYONE!

mz-tia said:

Yes! We will be able to use that parking lot also. Our actual lot parking is for Mitsubishi/DSM vehicles.. We will be clearing out our lot even our showroom for this event.. We are working out special pricing for everyone who shows up!! Please feel free to invite EVERYONE!

Click to expand...

shit, in that case this will be one ill definitly try to make! it is after all right after my birthday (june 21st) dibs on showroom floor for my DSM! and groundvision performance's DSMS (if they show up) heh

urbansmoker1 said:

shit, in that case this will be one ill definitly try to make! it is after all right after my birthday (june 21st) dibs on showroom floor for my DSM! and groundvision performance's DSMS (if they show up) heh

Click to expand...

.. I am only going to have 4 cars in the showroom. Dont want to over crowd. I'm trying to get NOS Energy Drinks to come out but that is proving to be a hard task.. we are working on getting some incentives for everyone that shows up.. I am for some good weather!!! Please invite Groundvision! IDK who they are but I would love to meet them!

mz-tia said:

.. I am only going to have 4 cars in the showroom. Dont want to over crowd. I'm trying to get NOS Energy Drinks to come out but that is proving to be a hard task.. we are working on getting some incentives for everyone that shows up.. I am for some good weather!!! Please invite Groundvision! IDK who they are but I would love to meet them!

Click to expand...

its a good thing Ground vision performance only has 2 GSX's and a talon ? let me know heh its a 2 man shop. and i am one of their biggest customers! and in hopes to maybe join them.


http://www.groundvisionperformance.com/

urbansmoker1 said:

its a good thing Ground vision performance only has 2 GSX's and a talon ? let me know heh its a 2 man shop. and i am one of their biggest customers! and in hopes to maybe join them.


Ground Vision Performance

Click to expand...

hehehe.. I see where you are going with this.. Well please let them know about the event and maybe I can send out some flyers to put in their shop? I am working out the details on everything still.. so far I have the date and time down hahaha..

mz-tia said:

hehehe.. I see where you are going with this.. Well please let them know about the event and maybe I can send out some flyers to put in their shop? I am working out the details on everything still.. so far I have the date and time down hahaha..

Click to expand...

ive let them both know and they will both be attending. im kyle by the way, alex and jack are the ground vision guys. jack said he might have 4 cars he is bringing. i told him about this thread

ground visions a joke.
charges 600 for a 2gb conversion using certifit bumpers

urbansmoker1 said:

ive let them both know and they will both be attending. im kyle by the way, alex and jack are the ground vision guys. jack said he might have 4 cars he is bringing. i told him about this thread

Click to expand...

Sounds great!!! Do they mind if i send them some flyers???

urbansmoker1 said:

never been to a meet sponsored by a dealership, id attend if you guys were giving deals on OEM equipment.. even if its DSM oil filters

Click to expand...

.. Yes.. The numbers are in the works as of right now but it will happen!

talonawd1991 said:

ground visions a joke.
charges 600 for a 2gb conversion using certifit bumpers

Click to expand...

maybe you should just to the conversion yourself then, rather than bi***, plus this isn't a thread to be bitching about it in the first place.

RaptorReed said:

maybe you should just to the conversion yourself then, rather than bi***, plus this isn't a thread to be bitching about it in the first place.

Click to expand...

Ditto

Wow dude real mature.
i hate seeing kids gettin ripped off by this soo called shopped.
My buddy had him build an engine and had to sell it back to alex because he cant even get a deck done correctly on a block. Whatever dude I KNOW the shops a rippoff. And its on the side of this kids house. Just warning you guys. But go ahead and take your stuff there.

talonawd1991 said:

Wow dude real mature.
i hate seeing kids gettin ripped off by this soo called shopped.
My buddy had him build an engine and had to sell it back to alex because he cant even get a deck done correctly on a block. Whatever dude I KNOW the shops a rippoff. And its on the side of this kids house. Just warning you guys. But go ahead and take your stuff there.

Click to expand...

jack built my motor 100% and i have had no issues with it. and it wasnt a rip off at all.... was very cost effective actually and good for around 700WHP if i wanted to push it that far... are you talking about coltons 1g rod 2g piston shortblock? i know the machinist they USED to use messed up my block a few times and the MACHINIST had to buy me 2 other 6 bolt blocks but that wasnt groundvisions fault buddy.. they have a different guy now to do all the decking and such.

back on topic though...

Yes hes my buddy he wanted to run a metal headgasket and told he specifically to mill it correctly. We got it back and your fingernail could stop in all the ridges. The oil sump was bolted in the wrong location and also we provided them with new crush washers for the oil squirters but he decided to reuse the old ones? Just little things like that.

Yeah lets get back on topic.

Yeah... sooo how many of you guys are gonna be able to make it out to this meet?!

I'll be there I had some great service while rebuilding my motor from Yonkers parts department. I am the lead tech at a local dealership so I try to support & buy locally! Glad to come out see some rides & support a local company!

Count me in, only if my car can get a spot on the showroom floor

I will even pay a fee to park on the showroom floor (that way I could get a friend of mine to come take some professional photos of the car with his camera)

Second thought, I need to buy a few OEM parts as the car is right now, so I will be definitly making purchases there, if there is specials going on, thats a bonus!

Let me know!

DSM_Zak said:

Count me in, only if my car can get a spot on the showroom floor

I will even pay a fee to park on the showroom floor (that way I could get a friend of mine to come take some professional photos of the car with his camera)

Second thought, I need to buy a few OEM parts as the car is right now, so I will be definitly making purchases there, if there is specials going on, thats a bonus!

Let me know!

Click to expand...

.. Luckily I have one spot open in the showroom.. MY SPOT.. i don't want to park my car inside. I am actually promising showroom parking to people who are going to be helping me out on that day... PM me for more info on helping.. I think that it will work out for u!

Also for the people who are coming for sure.. if you can please RSVP on the facebook events page that would be great! That way I have a better idea of how many people are going to actually show up.. Thanks and I look forward to seeing everyone there!!

http://www.facebook.com/events/247372068688146/

PMd and RSVPd.

mz-tia said:

.. Luckily I have one spot open in the showroom.. MY SPOT.. i don't want to park my car inside. I am actually promising showroom parking to people who are going to be helping me out on that day... PM me for more info on helping.. I think that it will work out for u!

Also for the people who are coming for sure.. if you can please RSVP on the facebook events page that would be great! That way I have a better idea of how many people are going to actually show up.. Thanks and I look forward to seeing everyone there!!

Younker Mitsubishi Meet/BBQ | Facebook

Click to expand...

Count me in, This should be a nice drive there.

I should have my 97 Spyder completed by then.

I don't have Facebook to RSVP. So if you could pencil me in that would be great.

gtrej01 said:

Count me in, This should be a nice drive there.

I should have my 97 Spyder completed by then.

I don't have Facebook to RSVP. So if you could pencil me in that would be great.

Click to expand...

will do!!! I look forward to meeting you! And please help spread the word! Thanks!

This meet is now NOS sponsored!!!!!

mz-tia said:

This meet is now NOS sponsored!!!!!

Click to expand...

YAY! Now I will be coming! jk, planned to come anyways

And I don't give a flying ___ about having my car on a show room floor or getting deals on parts, just coming to enjoy and have some fun.

xxNocturnalxx said:

YAY! Now I will be coming! jk, planned to come anyways

And I don't give a flying ___ about having my car on a show room floor or getting deals on parts, just coming to enjoy and have some fun.

Click to expand...

It will be fun!!!! Im not going to let all of this stress go to waste