I have a 2gb eclipse and I have since converted the front and rear to a 2gb talon as well as the 2ga talon sideskirts. The final thing I'm trying to add is the 2gb talon "strakes" but before I go drilling holes in the car I want to see if anyone out there can help me out with the measurements for them. Thanks in advance, and I do plan on using window weld but would like to have the clips in them as well.

I just ran out and measured mine. From the body line in the lower door, mine are 4 inches up from that line in the front, and 6 inches up in the rear. 1/2 inch from the front of the door and about 6 inches from the rear wheel well.

Awesome, THANKS! Anyone else just to have multiple data points?

I plan to do the same thing to my 99.

If I remember to, I'll check my 97 Talon when I get home and snap some pics.

I haven't put mine back on post paint yet. I can measure the holes and give you dimensions for where each hole is drilled.

Ok lets see if I can type this out and make sense.
All measurements were done from the bottom of the door line not the bottom of the car.
#1 is towards the front of the car and it counts towards the rear.

Back piece behind the door:
1st hole one of two, 3 Inches from the door and 11 Inches from the bottom line of the door.
2nd hole 9 1/4 Inches from door and 11 1/4 Inches from bottom door line.

Door piece:
four holes
I referenced the door for this.
1st hole 3 7/8 Inch from the front and 8 Inch from the bottom.
2nd hole 13 7/8 Inches from the first hole and 9 Inches from the bottom.
3rd hole 15 7/8 Inches from the 2nd hole and 10 Inches from the bottom.
3rd hole is 16 1/2 inches from back of door.
Hole 3 and 4 are 12 3/4 Inches apart.
4th hole 16 1/2 inches from the 3rd hole and 10 1/2 Inches from the bottom door line. (3 3/4 Inches from the back of the door)

Hope that helps!

sweet i will reference these numbers when i add my streaks on my 2ga.. thx to bigblaze

IN for pics when you are done it is going to look awesome. I haven't ever actually seen a 2gb talon in person.

I know its been a while but THANKS A LOT for all the help gents!

when I got mine from tonyseagle he made me a temp plate for them. Made it super easy.

Spyders with 2GB Talon conversions are sexy......

Anyone want my strakes? I actually find them quite unappealing but can't just take them off because of the holes. Been looking at many different cars' door gaurd to perhaps replace them with a lower profile trim. Any ideas? Idealy would rather having nothing but don't want to paint the whole car just to cover the holes.

tkrperformace - That is very unique, have never seen anyone mashup a spyder and 2gb talon before

how much? all I need to complete my conversion

tkrPerformance said:

when I got mine from tonyseagle he made me a temp plate for them. Made it super easy.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Click to expand...

Care to make another template of your template and send it to me?