It sounds a lot like a lifter that isn't primed up yet.

I was thinking that but it seems so loud it makes me think its the motor

Think it's knocking?

josh408 said:

Think it's knocking?

Click to expand...

Thats what I'm thinking because really sound much like the ticking

DWR-DSM said:

I was thinking that but it seems so loud it makes me think its the motor

Click to expand...

I agree ^^^
I can hear a little lifter noise but there is a much louder solid knock in there.
Might have some lower end problems.
Go get some cheap mechanic's stethoscopes.
Listen to it from underneath & see what it sounds like.

Rod bearing.... Not to say it it is definitely, just based on what I heard and a similar video I made... but I have had 2 with bad rod bearings and they both sounded like that...

Record it again with a little rev (from the TB)

Aproductions said:

Record it again with a little rev (from the TB)

Click to expand...

I'd do it when I go check on it tomorrow. I believe it gets much louder

That is definitely something wrong internally. There is no way that's lifter tick. Pull the pan and see what the deal is, hopefully you can catch it before it screws up more than the crank.

No it is not typical lifter tick, but a collapsed lifter will sound just like that.

Collapsed lifters will throw their rockers off quickly as well which can cause damage depending on where the rocker goes.

Def sounds like a spun bearing as my old motor sounded exactly like that. Unplug each of the spark plug wires one at a time to see if it eliminates the noise. If one of them does, don't touch the car anymore and it's time for a rebuild.

sounds like the motors toast. spun bearing is def a possibility

I figured it out, knock and lifter ticking. Thanks for the replys