The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

zmax and other crap [Merged 4-8] Slick 50 oil gas additive additives snake

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CH152

20+ Year Contributor
296
0
Oct 8, 2002
Lexington, Kentucky
I have put zMAX in all parts of my car that came with the kit, they replace the parts if something breaks while you are treating it with it. You all ever used it before? if you have let me know, and also what other additives have you all used that you could tell a difference in? i.e. motor up, engine restore. let me know:thumb:
 
Turbo timers have an actual reason for being there... Many people agree or disagree with the use of a turbo timer but they all still believe a car should be cooled down properly... ALL cars not just turbo cars.

But it is mainly for the use of idling down the turbo. Idling the turbo is important so that the oil inside of a turbo drains out properly. Cool investment for a turbo to last longer? It is better safe than sorry if you upgrade your turbo because those things arent cheap.

That's why (well at least in my car on the driver visor) it says to let vehicle idle for a min. of 60 sec. before driving hard or putting a load on the engine. Also same with before shutting it off it says to wait 60 sec. if vehicle was just driven hard or with a load. (may not be exact words used, but close enough).
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top