- Thread starter
- #51
mnetwork
15+ Year Contributor
- 1,017
- 2
- Feb 25, 2006
-
New Milford,
New_Jersey
I was moving 46lbs/min on a HX35 in a 12cm housing at 25psi on stock cams.
Ditch that bolt on housing.
Swapping out the housing would mean new housing, new manifold, new o2 housing and new/modified downpipe. I'm not convinced that I would be getting the airflow numbers that I should be just by doing that, so I am reluctant to do this. I have never tried adjusting my cams, but I doubt that I could make a good enough change with the adjustment alone.