The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support ExtremePSI

which computer do i need?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

If you look at your fire wall right above the break booster you should see the emissions and fuel pressure control solenoids. If I remember correctly there will be 3 solenoids there if it's a Cali emissions car and only 2 if its fed emissions.
 
1.8' DSM's don't have those mentioned selenoids by the brake booster.

California DSM vehicles has the EGR temp sensor which is located by the EGR valve mounted on the back left (passenger) side of the INT manifold.

If the sensor is not there (or, even the EGR valve itself and just a blockoff plate is there in it's place), it's a Federal vehicle.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top