The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Products the DSM crowd would like to see made

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

As a community what would you all like to see made and produced most for 1g and 2g's? Some examples would be Subframes, Crossmembers, Control arms, Turbo manifold, Bolt in fuel cells and the list goes on.
 
How about a rear carrier bearing mount for awd swap guys?

Or a front undertray from the bottom front of the bumper to the inner fender liners? Like an evo. THere are pics of it being an OEM part, but JNZ and local dealers called me crazy...Haha

Number 3 on the pic...
You must be logged in to view this image or video.
 
Last edited by a moderator:
How about a rear carrier bearing mount for awd swap guys?

Or a front undertray from the bottom front of the bumper to the inner fender liners? Like an evo. THere are pics of it being an OEM part, but JNZ and local dealers called me crazy...Haha

Number 3 on the pic...
You must be logged in to view this image or video.

+1 agreed
 
Maybe someone can make aluminum rad brackets that dont cost an arm and a leg.
 
Hence why I am throwing it out there haha.. I'm in the Army. Theres not a chance in hell I can do that.

And Bud, the gauge pod you are referring to is called a bezel.
 
I'd like to see some nice SMIC's made again for the 2G instead of rigging in a Supra SMIC.
 
You should ask around and see if you can't get them made for 50$..
Thats the plan. After STM went from $50 to $80 and now $100, I cant justify spending that much for such a small piece.
I'd like to see some nice SMIC's made again for the 2G instead of rigging in a Supra SMIC.

Hahn makes them too man. Theres a bunch out there.
 
Thats the plan. After STM went from $50 to $80 and now $100, I cant justify spending that much for such a small piece.


Hahn makes them too man. Theres a bunch out there.

No manufacturer actually makes them anymore, you can only pick then up second hand.
 
They'll either look great and be priced appropriately. Or they'll look like shit and be priced appropriately.

What's wrong with the stock brackets?

I get that. But they arent looking any better than they were a year ago.

And nothing is wrong with the stockers, I just want some more shiny stuff.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top