The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

where to get muffler like this?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ed1380

Supporting VIP
2,972
37
Sep 29, 2007
ATL, Georgia
like the attached pic.


dual rolled outputs. 2.5 and/or 3" input
 

Attachments

  • P1030477s.jpg
    P1030477s.jpg
    42.5 KB · Views: 93
Last edited:
Rockauto i believe has a few mufflers the last time i checked. I doubt theyre that exact one though. Shipping will also be a bi***
 
What a piss poor answer, He obviously likes it and its looking for one, not for what you like.
The closest I've seen is this
DUAL OVAL SLANT TIP OVAL MUFFLER [63-0628] - $89.81 : Muffler Mall, Performance Muffler, Universal Muffler, Stainless Steel Mufflers, Exhaust Tips

Agreed you shouldn't tell him to get something that he's not looking for.
Aslo this one is on map and you can control the volume:thumb:
Varex Remote Controlled Sport Muffler (Oval w/ 3" Inlet & Dual 3" Round Tips) - Modern Automotive Performance
 
I don't want a fart pipe. I want something that looks like the factory dual tip but less restrictive.



The others look nice :) almost got a heart attack on the last one
 
OP - I wonder if you'd be interested in something like this?:
http://www.dsmtuners.com/forums/bolt-tech/279939-my-new-stock-stealth-looking-muffler.html

And here's a link to a similar muffler, only dual tip:
http://www.dsmtuners.com/forums/bol...stealth-muffler-axle-back-exhaust-system.html

Here's a link to the 3" inlet dual tip muffler on Vibrant's website. I wouldn't order directly from them because you can find them for cheaper elsewhere:
Vibrant Performance ::.

Personally, I've never been much of a fan of the 4-1/2" mufflers on APEXi and similar brand exhaust systems myself. They're obnoxious because of their size and how loud they are, they draw too much unnecessary attention to the car and they're completely overkill in my opinion.
 
You must be logged in to view this image or video.


I'm guessing you've already got a muffler but just in case you haven't here's a pic of my vibrant 3" in dual 3" out - I decided to go with black but they have other options. It's a good quality muffler and the polar opposite of a fart pipe!
 
Last edited by a moderator:
500$ really isn't steep at all on that muffler. Its basically an electric cutout and 2 mufflers in one. Its got a 3" straight through for go/loud, and a baffled muffler for slow/quiet. Your going to pay ~ 200$ for an electric cutout, and around 70-120$ per muffler for a good brand. Plus your going to pay for pipe, and fabrication, and then figure out a way to mount the 2 different types of muffler that doesn't look like ass, and still come out with something that doesn't perform as well.

Yeah you could got with a cutout to open down pipe, but that shit sound likes total ass.
 
OP - I wonder if you'd be interested in something like this?:
http://www.dsmtuners.com/forums/bolt-tech/279939-my-new-stock-stealth-looking-muffler.html

And here's a link to a similar muffler, only dual tip:
http://www.dsmtuners.com/forums/bol...stealth-muffler-axle-back-exhaust-system.html

Here's a link to the 3" inlet dual tip muffler on Vibrant's website. I wouldn't order directly from them because you can find them for cheaper elsewhere:
Vibrant Performance ::.

Personally, I've never been much of a fan of the 4-1/2" mufflers on APEXi and similar brand exhaust systems myself. They're obnoxious because of their size and how loud they are, they draw too much unnecessary attention to the car and they're completely overkill in my opinion.





:thumb:


The vibrant ones are really nice.
 
Magnaflow oval 18" IIRC (I have a second 5" round Magnaflow mid exhaust as well).

3" in, dual 3" out with a straight through design.

<iframe width="560" height="315" src="http://www.youtube.com/embed/Eb2aET25Tdo" frameborder="0" allowfullscreen></iframe>


IMO if you wish to do a cut out (anyone), stick with the stock catback, get a 3" downpipe and get the cut out installed there or after a high flow cat if you have emissions.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top