How important is the Radiator Center Support bracket?

icer412 · May 24, 2011

I have a 1997 Automatic transmission GSX with a gReddy FMIC 24v. I just bought a 3 row Mishimoto radiator and have slim line fans. Since this GSX is an automatic transmission, I require extra cooling of the oil since the Mishimoto doesnt have an oil cooler housing. So I have a 12 x 11 x 1(ish) oil cooler that I need to mount.

I want to mount it between the FMIC and the condenser unit but the Radiator Center Support bracket is in the way.

So my question is: How important is this bracket? If I remove very large portions of it will it be that big a deal?

Also the bracket has been putting some nasty dents in the FMIC so thats more incentive for me to want to remove large portions of it.

thanks for the help.

You must be logged in to view this image or video.

nuclearr · May 24, 2011

Yes it can be removed. How ever if you plan on running the stock hood latch you will need it. Or find a way to modify it. If you use hood pins you can remove the latch and bracket.

TWOpointFORliter · May 24, 2011

If you just remove the lower portion of it you can still use your stock hood latch.

icer412 · May 24, 2011

Glad to hear! Thanks for the help!

Guzman08 · Jun 25, 2011

dont remove that, its helps support the hood latch when you close the hood. The previous owner of my car did that to put in a intercooler and i always had to lift up the front bumper and push on the hood for it to close until i welded a support beam for it.

TWOpointFORliter · Jun 25, 2011

If you remove the whole thing then yes you will have issues getting your hood to latch. However if you just remove the portion below where the latch bolts to it then you won't have any issues with your hood closing properly.

Diehardmitsu · Jun 28, 2011

I wouldn't take it out. Get creative, find other way to mount the cooler.

dsmkight · Jun 28, 2011

CUT IT OFF SHAVE SOME WEIGHT ooo and get hood pins

HULK · Jun 29, 2011

I think that the easiest way to do it without affecting anything, is to just cut it in half.

BigRSnail95 · Jun 29, 2011

fabricate a bracket and mount it where the side mount intercooler was.

400hp93talon · Jun 29, 2011

dsmkight said:
CUT IT OFF SHAVE SOME WEIGHT ooo and get hood pins

Yeah listen to your inner rice....You hear it......Hood pins look so much cooler!!!!....

The Top DSM Community on the Web

How important is the Radiator Center Support bracket?

icer412

nuclearr

TWOpointFORliter

icer412

Guzman08

TWOpointFORliter

Diehardmitsu

dsmkight

HULK

BigRSnail95

400hp93talon

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds