The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Ft. Hood/Killeen TX Area DSM'ers INSIDE!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I'm in Dallas, which as many of you know (obviously) isn't in the Ft Hood, Kileen area. However due to the lack of people posting for the DFW area, I'm forced to try and branch out to other surronding areas, and since Ft hood isn't too far from Dallas I thought I'd try in this area of the fourms. So if anyone decides to have a meet and gives me enough notice, and I get my car running again, I'm down for a drive to meet up with some fellow DSMer's.
 
man guys im so sorry i couldint make it today.. i had cq last night and on top of that my clutch line has a crap ton of air in it and i wasint able to get it bled today. dam shop was in sutch a hurry that they forgot to bleed the frekin line.. man im so mad about it. that shop is not geting my money any more. B&M transsmissions in killeen in a big frekin no go. and not to cheap.. 480 to put in a clutchmasters clutch and fidanza flywheel... DONT GO there.. the'll just "forget" something. but im sry i didnt make it today. mabey ill get beter luck next time.
 
hay guys, me and 2 other dsm'ers met up Friday night at the sonic on rancier and 38th. i think its a good place to hang out.. good lighting and the staff didn't mind we were there.. although ide suggest to buy something to at least keep them off our backs. im going to have the guys meet back this Friday or Saturday night then head out to the track. wondering if any one else would want to do that. all of our dsms are white.. so we need to add some color.. LOL. hope to see you there. give me a call or msg me back on here. my number is 217-508-9599. later
 
Prior DSM Tuner from K-Town. Now residing in Harker Heights area.
Have a few freinds that still run DSM's. I do have a buddy who I am working with on getting his 98 Eclipse GS up and running. Hit me up if you guys are going to have a meet. Would like to show up.
 
There's a strong EVO following in the Fort Hood area. They normally "meet" every Friday night. The location has changed from last I know as we used to meet in the old Target parking lot. Just hit up one of the EVOs on the street as I'm pretty sure that they'll know the deal.
 
Did this die out? Still meeting? Running a 99 GS
 

Attachments

  • eclipse2.jpg
    eclipse2.jpg
    57 KB · Views: 172
  • eclipse3.jpg
    eclipse3.jpg
    50.9 KB · Views: 146
  • eclipse4.jpg
    eclipse4.jpg
    52 KB · Views: 149
  • eclipse1.jpg
    eclipse1.jpg
    50.7 KB · Views: 215
Hey whats up yall? Well im over in iraq right now and some of yall CAV guys here too but ill be getting stationed down in Fort Hood next year after i get back so ill be looking foward to meeting alot of yall, im from san antonio and post up there and will be making it to the meet we have on the 17th of july if yall interested in going. well goodluck to all of yall.:hellyeah:
 
I'm also in Iraq but will be home in sept. My 96 tsi is currently in about 200 pieces in my garage in Harker Heights. I been mailing performance parts home since December and managed to do my head gasket and head rebuild on my R&R (My wife was pissed) BTW I'm one of those 1st CAV guys :p. I'm definitly down to meet up with some fellow DSM'ers and work on some cars and shoot the ish.
 
3acr here.... just got back like a month ago... i think you guys were replacing us. Stay safe
 
I'm also in Iraq but will be home in sept. My 96 tsi is currently in about 200 pieces in my garage in Harker Heights. I been mailing performance parts home since December and managed to do my head gasket and head rebuild on my R&R (My wife was pissed) BTW I'm one of those 1st CAV guys :p. I'm definitly down to meet up with some fellow DSM'ers and work on some cars and shoot the ish.

Hey PM sent ^
 
gentalmen ill join the club, same M.O.. just getting back from iraq. i need consultation on my project, 98 gsx 6bolt block/7 bolt head .. im currently working on trying to get her running properly so if any one here is experienced with the swap and or the ecm/dsm link, i could use some mentoring. Thanks look foward to networking. :)
 
Well im still stuck here in kuwait but I know i wont be in fort hood till like sometime between APR-JUN. but both my DSMs should be done by then and ill need to get rid of one of em once i get to Hood and then shortly after get rid of the second one. :( all this money going into em and then bye bye but eh its ok LOL. Looking foward to meeting yall once im down!!!
 
just wanted to give a shout out to all us gulf coast guys. Just got back from my last tour. and im currently working on my broken as hell dsm. but i think i may have the problem finally isolated, after about 6 months of total time working on it. was thinking maybe we could get a real connection between us all. having real dsmers to talk to face to face about our cars would be a nice change.
 
^ hey whats up welcome back, i just got back my self too, im stationed out of fort polk but served under the cav unit in iraq just recently and ill be heading to fort hood here soon so hopefully we can get all us DSMers together some time and meet. currently having one of mine rebuild and redone up so once its complete this month going to send my other one too to get done so ill be up there with both of em and hope to meet you all. welcome back and all!!
 
do yall happen to have like a group site i live in waco and i am always looking for dsm people
 
Well im in the group on facebook for texas and san antonio dsmtuners but idk about this local killeen area stuff. Saw like 6 DSMs lastime meet up in killeen but was in wifes car and was busy so didnt stop by :( i shoulda
 
Please be on the lookout for my stolen Talon, in this area. If you see it, please call 352-613-2463.

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
Selling the 2g & building a galant vr4.... 2.0 long rod, hta3794 ftw
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top