You could try Pick N Pull, I'm sure you could find some 1g's out there that have them. If this doesn't work you could always try a dismantler. I don't think going to satan for this one is going to set you back much. Even if you do have to pay $5 for a piece of plastic, it may just be the easiest way to do it.

wil ones from a doge dealer or huyndi dealer work some of are parts are the same

dodge im tyard

woooop said:

dodge im tyard

Click to expand...

yes the ones from dodge will fit on a mitsu, they're only a few bucks. I've had to get one before.

woooop said:

wil ones from a doge dealer or huyndi dealer work some of are parts are the same

Click to expand...

Half my parts come with Hyundai or Chrysler logos from the dealership I work at. Employee discounts kickass.

I don't remember them being 5 bucks, 2.50 maybe 3. I'll pull a reciept and look.

if all else fails you can go to slowboy http://www.slowboyracing.com/more.php?id=2070&

I just bought a set of four of these things from Mitsubishi for about $2.50 ea. Having seen how stiff & brittle they get after only 100K miles, at this price I can't imaging getting them used off a wrecked vehicle being worth it.

I had originally asked for them at a local auto parts store who said all they had access to was a Felpro "Injector O-Ring kit" and they thought they might be included in that kit. I figured for $4.00 for the kit it'd be worth finding out: nope they're not included in that kit. Just the tiny o-rings are, not this "insulator" as it is called out in the Mitsubishi exploded diagrams.

- SK

woooop said:

Where can i get the black spacer that goes inbetween the rail and injector not the one that goes into the head ,somewhere cheeper than satan

Click to expand...

Just go to the dealership and get them. They will only be at most 20.00 for all of them and you know they will work and arent broken.

Part number for these??

Md095402

I did the same thing with the "kit". The Mitsu dealer is your best bet.