Here is mine off my Galant, I scored this guy off some forums in Thailand.

I don't run one. It is hard to fit 10.4mm wires under one without a whole bunch of spacers and shit. The one with DSM cut out of it was made by someone on here. I don't remember who but there was a big groupd buy on them. It was on this site, I think. I'll just stop talking, but it was something custom not from a company. A friend of mine bought one and powder coated it blue.

I know where the DSm cut out cover came from. A guy on local forums here made them. His user name on there was svtdsmguy. Forgot his name but they are cool covers.

DSM_PWR said:

,,,

Click to expand...

Where did you get the cover and the decal?

Dsmj89 said:

Thanks man.

The biggest step to have it come out good is prep work, spray some purple power degreaser on the valve cover and sand it with semi-rough sanding paper, spray some more and sand again throughout the whole vc, for the tiny spaces use a knife to get the grime out, then wash it all off with water, dry it, and paint away.

Click to expand...

I don't suggest washing it with water. To get the best turn out your going to want to start by getting as much of the grease and grime off it as you possibly can to insure that you don't get fish eyes all threw your fancy new paint . Then you want to sand every area with 320 grit sand paper so that the paint has a good substrate to adhear to. After you finish that step you want to get some wax and grease remover ( or paint thinner) this will remove almost all of your greasy finger prints and any other leftover crap on it. Once you have completed this step you can start spraying i would personally do 2 to 3 decent coats and you will have a solid paint job

This is what I went with.

<a href="http://s1087.photobucket.com/albums/j472/Alangsx/?action=view&amp;current=downsized_0415010911.jpg" target="_blank"><img src="http://i1087.photobucket.com/albums/j472/Alangsx/downsized_0415010911.jpg" border="0" alt="Photobucket"></a>

DSM_PWR said:

,,,

Click to expand...

I love this!

GUY said:

Here is mine off my Galant, I scored this guy off some forums in Thailand.

Click to expand...

Is that really a genuine Mine's cover?

ilco187 said:

never seen another like mine.

Click to expand...

I have that one too.

SleepinGVR4 said:

You must be logged in to view this image or video.

Click to expand...

Simple and purdy Very nice.

I ditched the yellow valve cover in favor of wrinkle finish black:

a few I made at work years ago. made 3 of each

this is from the mirrors that are in airplane bath rooms just added a hks sticker to it I had laying around the garage.


still have 1 of each laying around

With her new manifold:

Here are few of mine.....

I'm thinking about making one that says "If you can read this, grab a beer, it's going to be a long night" or "If you can read this I'm borkT again".

Jaxness said:

You must be logged in to view this image or video.

Click to expand...

The shocker was a nice touch

Haha, thank you

GUY said:

Here is mine off my Galant, I scored this guy off some forums in Thailand.

Click to expand...

Incredibly sexy. Find one for me!

i surely need a wire cover!

agarc023 said:

The shocker was a nice touch

Click to expand...

hahah, i didnt even notice that.

This is the one that I shall get.