The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

Radiator hose help

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

918_gsx

10+ Year Contributor
127
0
May 1, 2011
tulsa, Oklahoma
Is there an easy way to to remove the hard pipe that's a part of the lower radiator hose that runs right under the exhaust manifold?
 
The line I'm talking about, has rubber hose from the low side of the radiator. Connects to the hard pipe, runs underneath the exhaust manifold and towards the water pump.
 
you're talking about this one and it's the water pipe. I can't recall how easy this would be with the exhaust and turbo in place, but as you can see there is a bolt holding it on just under the #1 exhaust and there's 2 more holding it on at the top of the gearbox to block.
I can only assume it will be a PITA to get out without taking the turbo off as the coolant lines for the turbo will more than likely snap in the pipe if you try to take them out and if you have the turbo lines down, you're pretty much going to stripping alot of the components off the turbo at this point go ahead and drop the turbo and make life easy.
Why do you need to take the pipe off anyway?
 

Attachments

  • Engine Pic's (2).jpg
    Engine Pic's (2).jpg
    54.1 KB · Views: 24
It is a PITA to remove without removing the turbo, so I would recommend just pulling the turbo to make more room and make life a little easier.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top