Post up the items you would like to sell. Trading and selling in person is a lot safer than shipping to another state.

Ok guys I have a 2ga talon that I am parting out. It has some really cool parts on it some only 2g some will work on 1g. I have cams,complete fuel setup, dnp mitsu manny, ets frontmount, 17wheels and tires in very good condition, rolling shell and more. Let me know!

anybody have a ecu??? for a 95 talon tsi fwd? my number is 402 853 3125

i am selling a 2g ets fmic for my friend.... $700 obo

looking for a ECM for my 96 TSi AWD let me know if you have an extra, I think you do DSM95tsi i called you earlier this weekend. just a heads up man

I am helping a friend look for a 420a motor that just blew. If you guys know anyone looking to get rid of one please let me know...Thank you

selling my exhaust from my talon its an apexi back with a ebay down pipe, 3inch turbo back. this will fit any awd 95-99 eclipse or talon.
$200 fror exhaust
im also selling a 2g eclipse or talon fmic ,its 3.5 inches thick,32 inches wide and 11 inches tall, with short rout pipeing with a hks bov on the lower pipe.
$175 for intercooler
and a 97-99 eclipse bumper with headlights, unpainted, cutout for fmic.and includes clear corner lights.
$150

everything is aslo OBO dont be afraid to make a offer.

call or text me at 402 812 3594, the name is mike. thanks for looking.



does not come with gm maf

I'll be in the market for a 1Gb front end swap in the near future, near Kearney/Grand Island/Hastings. Willing to trade my 1Ga stuff plus some cash depending on condition. All depends on if I end up with the 91 Talon I'm looking at or not.

2G DSMLINK 2.5/EPROM ECU/CABLE - 425$ or trade for 1g link

2G EPROM ECU -- non socketed - 100$

2g maf translator 75$

Next up is a shep racing stage 4 tranny with Option - $300 REM ISF® Process Option - $275 4 spider center differential

Has a hole in the front differential casing, can probably be welded shut if not just needs a new case, all internals are fine in exception to minor pieces such as roll pins that are not salvageable when taking apart.

Will take 600$ FIRM for this transmission as it has less then 500 miles on it and you can obviously see that by the gears. They look brand new!

402-224-0021 text/pm this stuff is priced to sell and shouldnt last long

WTB: AWD rear strut

I guess it's about time this suspension started going out after all these miles. Hopefully, someone has a parts car or spare strut. I'm not looking for anything fancy, just something to get me through this winter. Let me know if you have one through PM or text (402-714-3409).

thanks,
Cj

Greddy fmic with 2.5" piping (have two pipes one with greddy flange & another one with 1gen flange)- $200

97 GS-T ECU (Non-EPROM)-75

Anyone have a 6bolt block? Prefer it comes with crank, rods, pistons, even if in bad shape as long as it can be bored and rebuilt.

I have one but its just a bare block...$100 takes it

Thanks for the reply but I have since purchased an entire car (wrecked) for $500. Pulled the motor on both already - waiting for a few gaskets to show up today hopefully - and might start installing the motor from the parts car into my car this weekend.

If anyone is interested in buying a 92 eagle talon tsi fwd let me know. I'm getting rid of mine to get a bike. I'm looking to get 2500 but i will take 2000 at the lowest. if interested or know anyone who is shoot me a pm. looking to sell quick

Alright.. I'm getting out.

I have already sold a lot, but I have the following still;

90 TSI AWD 5sp with 95k on it. The motor has 150+ across all 4. Brand new tires, 3" drop with rear control arms so no toe-in problems. Car is a black/grey with grey leather. Interior is ok with some rips in the front seats. Has an e316g on it and k&n fipk. Has a 3" downpipe with a resonator and dump under the car. Car is currently on spring pressure, but has never been over 18psi since I have owned it. It has an exedy stage 2 in it. New ball joints, new rear main seal. Its a pretty nice car over all, idle wanders a bit (i think idle switch on TB)

Car has 3g lifters and just had all new timing crap put on it.

-Wanting 3,500 for car. If I get full price, I will include link v3 setup with it. Otherwise, stock ecu is going back in.

Link v3 lite setup with ECU: If someone wants it, its going to be $500 plus your ecu.

XSpower o2 housing setup for recirc and wastegate. 3" vband fitting for downpipe. $75

Virgin 6 bolt block: $100

Decent 6 bolt head with cams and cam gears: $100

Virgin 6 bolt crank: $125

Also have a set of 1g rods with pistons on them, 2 of the pistons have cracked lands, but the rods are good. $40

1g PS pump $20

1g front case with gears and crap $75

Balance shafts $offer

Tons of other little crap... just let me know.


Brian
402-650-4266
call or text
Also hav

In the market for a 3inch turbo-back exhaust system, wastegate solenoid, and a MBC for a 97 talon tsi awd
i live in kearney but can travel, if its the right price give me a call, 308-991-5152

Looking for a vss and a 2gb bumper with lights. Pm me with price and info

*edit*
also need driver front strut and spring

Do u know anyone who has a 97-99 gsx for sale?

I would actually be in the market for a spare 6 Bolt motor if the price was right. Thinking about going for a more aggressive build for the next go around.

I have a good 6 bolt crank, block, rods etc. The motor only had 95k on it when pulled and was planning on rebuilding it, but bought a longblock instead.

i have a non turbo 4g63 from a 94 eclipse gs. i believe its 7 bolt tho even tho its a 1g. anyways the head is warped and it has a spun bearing so its mostly just for parts or could maybe be rebuilt. its most all there tho so if you need any parts off of it or the whole thing even shoot me a message and offer and ill let u know if i have it.

Hey guys, I'm looking for a 2g awd downpipe and a 1g awd catback for my VR4. preferably 2.5in but wont turn away 3in. Please let me know what you have.
Thanks!

Looking for a 2gb 1997-98 Talon front bumper.

Edit: Found a bumper thanks for the space

have a 6 bolt motor comes with block, pistons, rods, crank, completley assembled head minus intake/exhasut manifolds.

call or txt me 402 686 6100