The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Fuel Injector Clinic

What did you do to your DSM today?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Today I waited; Which is the hardest thing for me to do. Hopefully she will be back up and running tomorrow evening. Then I can learn how to tune my SD setup, and get ready for the meet on Sunday.
 
Fixed ny girlfriends clutch master cylinder in her tsi awd since she was at work and couldnt do it.
 
Ordered lots of parts to get all the maintanance out of the way so I can get back to the fun stuff :D.

Now I just need a 20g, 850+cc injectors, afpr, and stainless steel brake lines and I'll be set :hellyeah:

You know I have all of those things just lying around right. haha.:sneaky:
 
rolled my fenders so my tires stop getting chewed when i hit a bump, and fixed my wastegate (the rod kept falling off) it was weird there was no hole to put a pin in but i fixed that by drilling one myself :D im proud
 
Going to start installing the water to air intercooler I bought from frozen boost...
 
started sanding and degreasing my engine bay to start my plastidip paint project
 
i pulled my first ever motor , my dsm of course, with no help but my engine puller :)
 
Took the manifold bolt out to change the gasket as it blew and spend 5 hours just getting 1 bolt out that had cross threaded it self! So I'm looking for some softer bolts as mine were stainless for some reason and a tap but I've been tole its an M10X1.75 bolt and its a special bolt? So I need a special tool! And getting that in the UK is going to be a pain £22 for 1 tap!!!!! So I hope to retap the turbo and put a nut under it with softer bolts to stop this happening again
 
jacked my car up and took out the oil pressure sending unit that was no good
 
Oh? I'm sorry. You going to get another one?

Not for awhile, probably once I'm finished with college I'll build a full drag 1g..

My car I wanted to be a drag car but needed a lot to be the drag car I wanted to be but I couldn't afford to completely convert it over as being a broke college student it basically had to be my daily driver too.
 
Not for awhile, probably once I'm finished with college I'll build a full drag 1g..

My car I wanted to be a drag car but needed a lot to be the drag car I wanted to be but I couldn't afford to completely convert it over as being a broke college student it basically had to be my daily driver too.

Yeah I know what you mean. I'm having to save a lot being in college in case something goes wrong with my 2G. And it's really annoying sometimes that I don't have the funds to get her the way I want.
 
I went out in the garage to grab a beer and smoke a cigarette. Looked at the DSM, doesn't get driven most days. I think I *MIGHT* wash it tomorrow, if it is warm enough. Yep, that's about it for this weekend.
 
Washed my car only to have it get dirty again on the drive home. It's finally spring weather so the snow is melting. Yay for warm weather, boo for dirty car!
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top