The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

fuse box relocation pics??

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mine is just under my Catch Can, best part is i didnt even have to cut or modify the harness, just had to extend my reverse light connector and my Rad fan connector
<img src="http://www.dsmtuners.com/gallery/files/7/3/5/8/1/img_0251.jpg" alt="Tuck Engine 2" />
<img src="http://www.dsmtuners.com/gallery/files/7/3/5/8/1/img_0132.jpg" alt="Engine With Tuck" />
 
Last edited:
^^^ I might have to tuck mine back there too. That's all empty space right now.

I am not 100% sure if it will work on 97-99. Mine is a 95 and i was able to run the whole harness around the front and under the driver side frame rail. My buddy has a 97 GSX and he had a few wires that connected from the fusebox to the factory harness on the pass side fender... so i can't guarantee this will work on a 97+
 
mine is just under my Catch Can, best part is i didnt even have to cut or modify the harness, just had to extend my reverse light connector and my Rad fan connector
<img src="http://www.dsmtuners.com/gallery/files/7/3/5/8/1/img_0251.jpg" alt="Tuck Engine 2" />
<img src="http://www.dsmtuners.com/gallery/files/7/3/5/8/1/img_0132.jpg" alt="Engine With Tuck" />

very clean
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top