I got bored one night and made an overflow reservoir for a buddy of mine.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Looks good with AN lines coming from it.


I also had requests for a 1g tank that could be used with short route piping. This is the prototype.
























I fit it in 2 cars, it worked in a modded car with short route piping and a basically stock car.

With hardware.





Here is the first tank mounted.

I'd buy one.

Very Nice Work.

I'd buy one for sure.

I smell $$$$$

Wow nice welds

Nice looking welds

Awesome!

I changed the 1g design a little bit with my latest batch of tanks. I put the breather bung on the side, it gives it a cleaner look. I should have some good in car pictures Thursday or Friday.

How much would you charge for one of those 2G setups if you were to make them?

Wow I love how you act like you just throw those together, and its no big deal. Those welds are clean.

Those are beautifull bro. If they were cheaper then aftermarket catch cans i would buy one for sure.

Very nice looking tanks.

These are made from 1/8" thick aluminum, hand crafted, guaranteed to fit and work flawlessly. They are not going to be as cheap as the Weapon R and OBX. Those tanks are just overflows, they don't work as a reservoir like our cooling systems require. Our systems need to be able to pull fluid back out of the tank when needed, those cheap universal ones don't do that. That is why my inlet is on the bottom of the tank. I have a local reputation for putting out high quality products and will do my best to maintain that reputation here too.

No need to explain your pricing, that price is more than fair, anyone who expects quality hand-made work to be less than cheap mass produced China crap is off their rock.

I just wanted people to know that those universal ones don't let the cooling system work the way it needs to. Most of the time all they do is cause problems.

Here is the finished 1g tank. I will have install pics this weekend.

looks awesome!

Would you be interested in making another location for the coolant tank? Some of us run the ETS intercooler with the kit piping and it runs a but closer to the coolant tank area.

I included a picture so you can see how the piping is routed.

thanks

I need some more pics of the piping to see what I could do.

yea, it was the only picture I had at the moment.

I will take more pictures as soon as possible.

very nice work man!

what about a polished one or powder coated option?

Started the 2g prototype tonight.

Would the 2g coolant tank mount where the stock one would go?