Is there anyone that can help with the finishing touches of a 6 bolt swap in a 1998 GST? I'm new to dsm's in general so any help is appreciated.

Thanks

still need help?

i might on sunday. fitting the flywheel and dropping it in. custom CAS is what i'm confused about still. it seems too simple. plug it in, connect blue wire to white wire.

let me know! PM me if ya need my number for any questions

Pitbull2o08 said:

i might on sunday. fitting the flywheel and dropping it in. custom CAS is what i'm confused about still. it seems too simple. plug it in, connect blue wire to white wire.

Click to expand...

it really is that simple! did you get the RRE version?

yeah it wasn't bad at all. it's all swapped in now and running fine. I'm going to be rebuilding my e316g and replacing the worn t25. i'll post pics later

almost done


all cleaned up






How can i fix these headlights so they will be brighter and not have the light impeded by the plastic housing?

the best way to remove the yellowing of the headlights is to progressivly wet sand. Start by using 500 grit paper on a da sander. Then move to 1000 grit, then to 1500 or 2k. Finally buff with a rotary buffer with a good polishing compound. (I have had good results with system one) Available at most auto paint stores. Be sure to keep them plenty wet when sanding and to tape off around the lights to prevent any paint damage