You must be logged in to view this image or video.

Uploaded with ImageShack.us


those are my (small 6") foglights.....

^What are you doing man..

I want OEM fogs =( Was ready to buy not too long ago but bumper cracked and needed to buy a new one and other misc. parts

i got my off a oem car parts website they work great,
as i have the sbr fmic, i had to make a braket to hold the fog lights in.

i then spryed the glass and here it is.


you can also get them on ebay.
97 98 99 ECLIPSE OEM FOG LIGHT RIGHT SIDE NEW LAMP D32A: eBay Motors (item 360285207931 end time Aug-27-10 10:48:16 PDT)

MITSUBISHI ECLIPSE FOG LIGHT DRIVING LAMP at MONSTER AUTO PARTS

Mitsubishi Eclipse Fog Lights - AM Autoparts

https://speedzonemotorsports.com/product.php?productid=938

just some for you guys.

$25 Wal-Mart Specials. I am going to use an OEM switch for them too. Right now I use the one provided. Momentary push button with indicator lights. But I want to put that module into the OEM switch XD

<a href="http://s693.photobucket.com/albums/vv293/Theboxmodder/DSM/?action=view&current=DSCF4578.jpg" target="_blank"><img src="http://i693.photobucket.com/albums/vv293/Theboxmodder/DSM/DSCF4578.jpg" border="0" alt="Photobucket"></a>

I run the stock one's on mine.

Definitely ditch those Wal-mart specials.

907gs-t said:

I run the stock one's on mine.

Definitely ditch those Wal-mart specials.

Click to expand...

Not all Walmart specials are created equal; see post #19

Wes... now that I look at it some more, I think your issue is the shape. All of your pics have rectangular shaped fogs, which aren't working with your front end. I would stick with some small/mid round ones; I think they would look much better.

As for performance, not sure what to tell you. As I mentioned before, my tiny little halogen lamps are almost too bright.

So for fog light replacements I went with a small set of PIAA fog lights.

You can see them in the pic below:


and them on:


They do a good job to splash light on the road, which I am looking forward to come snow season.

Oh, and for those wondering, I have switched out the projector headlights since the photo was taken.

No fog lights for me, I think they are a waste.

I am a fan of that removable, rally inspired, light bar! I want to see it finished!

Hey guys,

I have the stock fog lights for my 1g Eclipse. Finally clipped them in yesterday and they weren't working. I'm soaking them in Liquid Wrench at the moment, but I'm going to see if the bulbs look blown or not. Do you guys know of any wiring issues with the OEM fogs? As in say, is it common for the wiring to come apart from the fog light button on the dash or something else?

Dr Funkenstein said:

Hey guys,

I have the stock fog lights for my 1g Eclipse. Finally clipped them in yesterday and they weren't working. I'm soaking them in Liquid Wrench at the moment, but I'm going to see if the bulbs look blown or not. Do you guys know of any wiring issues with the OEM fogs? As in say, is it common for the wiring to come apart from the fog light button on the dash or something else?

Click to expand...

Make shure you just dont have a blown fuse. As for the bulbs in the foglight housing its self. The bulds can be changed without removing them off the car. They are H3 bulbs 35 watts each.
Just pull the rubber boot off the back and there is a skinny metal bar you need to slide over and the buld comes right out. But you dont need to remove the buld to test it out. Just get a car charger and hook the wires to the wire clip on the light.
The switches in the 1g DSM's do go bad and I wouldnt doubt that yours is bad or you have a blown fuse or relay.

I've thought of putting some fogs in the outer hole/vents on my 2Gb Talon bumper since I get a lot of fog where I live. However, it would then get in the way of my oil cooler.