The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Fuel Injector Clinic

Custom built upper intercooler pipe

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

LTUDSM

15+ Year Contributor
1,802
5
Jun 27, 2005
Morrisville, Pennsylvania
Finally i got a solid Upper intercooler pipe,so no more worries about the leaks through the couplers :p.The pipe was made by KrazyHouse Customs..
 

Attachments

  • P080810002.jpg
    P080810002.jpg
    43.3 KB · Views: 145
  • P080810003.jpg
    P080810003.jpg
    42.1 KB · Views: 140
  • P080810004.jpg
    P080810004.jpg
    42.8 KB · Views: 131
I dont like where you have your blow off valve. That gives you no chance to upgrade to a GM Maf in Blow Thru setup
 
If thats your plan then welded pipes are great.
 
Agreed. Not every DSM setup consists of a GM MAF. The pipe looks good, bro. I hope you have some solid mounts so that sumbitch doesn't flex during shifts :D

i got a polyurethane mounts..... trying to get boostleak free . but im still havin a leak somewhere,i hear hissing sound,but can't trace a damn leak,rplaced everything ,that is possible: shaft seals,injector seals,new vaC lines,well i got only four of em left (bov,wastegate,boost controller,AFPR). Spe nt over 400 on a pipe to make a couplerless.all the gaskets were replaced..... no exhaust leaks. got the idle tuned ,so it idles smooth.look like no vac leaks,but the hissing noise is pissin me off....:ohdamn: Tommy Any suggestions of where the leak might be commin???
 
If thats your plan then welded pipes are great.

i had a gm maf setup on my 1g.had alot of problems getting the idle right,because it was bouncing from 800 rpms to 1100 rpms. prob bad luck. and right now im venting ### of the Tial,having no issues at all, well accept the rich condition after shifting the gears.... idles smooth,doesn't stall.even if i rev to redline, the rpms drops no lower then 850(thats where i set it, due 272's)

i never tried with ecmlink,maybe they work together really well,but i don't wanna risk and have the same prob as i had before...
 
Do a boost leak test. My car was pissing vacuum from the middle of my throttle body meaning the top and bottom portions.
 
Do a boost leak test. My car was pissing vacuum from the middle of my throttle body meaning the top and bottom portions.

i did,but still can't find such a small leak. the pressure from 25 to 0 drops in like 4 minutes. but the leak is so small to be traced down.,tried spraying with a soapy water,didn't see any bubbles comin out....... thats weird...
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top