The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

new from co

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

boostenhard

Probationary Member
7
0
Jul 6, 2010
thornton, Colorado
new to the dsm world have allwas wanted on but have had outher progects in the way.
I just picked up a 1991 tsi auto
190000 suposily it was rebuild 50000 miles ago block looks clean so ya maybe going to do a conprestion test to see

My plans for the car are 450 hp or more relibel i no every one say they cant be but im going to make it that way

one ? is how much hp will the auto hold up stock
 
new to the dsm world have allwas wanted on but have had outher progects in the way.
I just picked up a 1991 tsi auto
190000 suposily it was rebuild 50000 miles ago block looks clean so ya maybe going to do a conprestion test to see

My plans for the car are 450 hp or more relibel i no every one say they cant be but im going to make it that way

one ? is how much hp will the auto hold up stock

Good luck with a old/tired Auto tranny. If you think you MUST be at 450, then make sure you set aside money to buy/build a built auto tranny. Before you start digging into things do a compression test and post back what you find out.
 
no ya understand
i found a tranny rebuild kit on here for like 450
i have never built a trans axel befor lots of rwd ones. my car dose not build any boost under a launch it builds to like 2000 rpm but no boost you know what it could be. IM thinking tc
 
hey auto guys what are some good tricks to get these things to build boost at a launch
 
he means use the brakes to put a load on the engine and it should boost like normal.
 
but still nothing they guy befor me had the blue wire mod done and then took it of so i wounder if tq converter is not locking up
also conprestion test is
110 #1
120 #2
115 #3
115 #4

it looks like all be rebuilding the car
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top