JayJones
15+ Year Contributor
- 201
- 0
- Nov 2, 2004
-
Davenport,
Iowa
Ok I dont know if I should post this in motor tech but i will start here. I have searched around and unablet o find clear info.
car is a 1995 Eclipse gs-t 97k orginal miles 5 speed
Lets start with when it started. I was getting ready to go on trip for work and was running late and needed an oil change. I stopped at the shop down the street and had them do it. I asked for mobile1 oil and they gave me penzoil (found that out later on down the road)
Shortly after this oil change I will be driving down the road and all of a sudden the car gets a wicked vibration in the front end. I spend up a little bit got worse and when I pulled the car out of gear it stopped. Put the car in gear and it started up again. While pulled over I poped the hood to check it out and the motor is running super rough and kinda sounds like it has aggressive cam. After searching around for about a minute it stops and starts running normal and smooth.
I did check the oil and had the proper level in it. looked clean. After a review of my print out of the work it showed they put 10-30 Penzoil in it.
I can figure it out I have since changed the oil (no metal shavings etc.)
car is a 1995 Eclipse gs-t 97k orginal miles 5 speed
Lets start with when it started. I was getting ready to go on trip for work and was running late and needed an oil change. I stopped at the shop down the street and had them do it. I asked for mobile1 oil and they gave me penzoil (found that out later on down the road)
Shortly after this oil change I will be driving down the road and all of a sudden the car gets a wicked vibration in the front end. I spend up a little bit got worse and when I pulled the car out of gear it stopped. Put the car in gear and it started up again. While pulled over I poped the hood to check it out and the motor is running super rough and kinda sounds like it has aggressive cam. After searching around for about a minute it stops and starts running normal and smooth.
I did check the oil and had the proper level in it. looked clean. After a review of my print out of the work it showed they put 10-30 Penzoil in it.
I can figure it out I have since changed the oil (no metal shavings etc.)