1G Clocking of the cam angle sensor

but · Feb 16, 2010

Hey guys I am putting together my rebuilt head and was wondering when I put on the CAS if I have to clock it a certain way with the tabs or what? Also when I put on the cam gears do the cams have to be a certain direction? Thanks Guys!

VETTE_50_TH · Feb 16, 2010

They cam gears can only go one way. You want to make sure that the motor is TDC and the gears are closest to be timed. The CAS you should start at mid range lined up for TDC. You do this by finding the groove on the outside of the tab, (one has a groove, one doesnt) which will face the front of the car. And install.

TjPhillips36 · Feb 16, 2010

Cams should have a dowel that will line up with the gears.

You must time the vehicle with a timing light after getting the CAS installed.

but · Feb 16, 2010

Ok thanks guys because the engine is out of the car right now. So where is top dead center with the marks facing side by side?

The Top DSM Community on the Web

1G Clocking of the cam angle sensor

but

VETTE_50_TH

TjPhillips36

but

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds