eek!!

Clean up that sending unit... its killing the pic

I like! +1 on the sending unit.

Typical 2g guys j/k I just pulled it out the back of the talon to mock fit it and cover up the hole so nothing gets in. It will get cleaned before install trust me.

Sweet!!! samrt decision

I am going with a single external fuel pump I just haven't. Made my mind up 100% if it will be a fuelab magnafuel or weldon. I am talking to a guy with a fuelab pump right now I might pick up which would def do the trick. I'm driving up to JMF in a little to drop off the cell to get anodized and shoot the shit with them and see the new shop. After I finish my fuel setup and get this engine machined and in the car this project will be coming down home stretch

Wow, you are awesome job,Sean. I haven't visited your thread in a while.

It will be one hell of a car... GL......

andy4g63 said:

Wow, you are awesome job,Sean. I haven't visited your thread in a while.

It will be one hell of a car... GL......

Click to expand...

Thanks a lot andy. Hopefully I run into you again this year at the showdown/shootout.

Gf ordered me another one of Pauls's front x-mas and my cell will be done next week and ill go pick it up at jmf. Should be a good week

Slippi84 said:

Thanks a lot andy. Hopefully I run into you again this year at the showdown/shootout.

Gf ordered me another one of Pauls's front x-mas and my cell will be done next week and ill go pick it up at jmf. Should be a good week

Click to expand...

Yea just don't run into me

DWR-DSM said:

Yea just don't run into me

Click to expand...

That'd be an awesome race.

habitatguy187 said:

That'd be an awesome race.

Click to expand...

Yes it will be. He's only a little over an hour away too

Slippi84 said:

Yes it will be. He's only a little over an hour away too

Click to expand...

Moving to Bennington VT in a few weeks . I will be coming to NYC alot since I have family n friends here. I make sure you will run into me tho

DWR-DSM said:

Moving to Bennington VT in a few weeks . I will be coming to NYC alot since I have family n friends here. I make sure you will run into me tho

Click to expand...

Yeah I would move far away from me too j/k. Well ill be watching your build as well and keeping an eye out to see you back in the area. Good luck

Got my new crossmember from paul(99gstracer). This time I painted it so it wouldn't rust like the last one from sitting out in the elements. Of course this shell isn't being kept outside right now still it looks much better painted anyway. Paul is the man and anyone looking to get that solid roll stop feel and shed some pounds this is the part you want to get.

Looks good Sean.

Slippi84 said:

Got my new crossmember from paul(99gstracer). This time I painted it so it wouldn't rust like the last one from sitting out in the elements. Of course this shell isn't being kept outside right now still it looks much better painted anyway. Paul is the man and anyone looking to get that solid roll stop feel and shed some pounds this is the part you want to get.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Click to expand...

looking good man. I was thinking of picking one of these up too. Does the removal of the north south braces affect the chassis any?

Superman said:

looking good man. I was thinking of picking one of these up too. Does the removal of the north south braces affect the chassis any?

Click to expand...

It's not supposed to but I'm sure it's made for straight-line racing and where turning isn't a concern. As you can see, you get rid of the two North-South braces and that's where you lose some weight. I have one as well but I have yet to install it.....it's a damn good piece and Paul's biz ethics are among the best.

Superman said:

looking good man. I was thinking of picking one of these up too. Does the removal of the north south braces affect the chassis any?

Click to expand...

It will to some degree but we actually talked about this in a big thread about these(not just paul's design) and in a nut shell as long as your not going to be using the car for autox or time attack or anything crazy like that it's perfectly fine to eliminate those north south bars. This tubular bar is lighter too so it's not just deleting the north south bar that saves weight. Anyone that considers straight line driving their main concern I would def hit paul up. They are cheap to considering your getting a solid roll stop and saving weight at the same time.

I have one of these pieces too. Im using it along with Avid "race" mounts.

I can see that maybe it would affect a bone stock full weight 1g on stock suspension to some small degree, but on a 1g with full suspension and some weight reduction, i cant see it affecting any spirited driving and cornering too much.

If it does affect it that much to where you can notice it, I bet a nice front sway bar will help out alot too. I'm not worried at all about driving my car without the North/South bars.

im assuming they would fit a gvr4??

Ive been running a tubular k-member, a custom made front bar for almost 2 years now. With kyb gr2s, and now k-sports and it takes turns just fine, even without the sway bar.

Hey paul hooked me up with one also sean. I got to mod it since my turbo is huge but I will get some pictures up.

You need to cut the north south bard and stilll run them across the main cross member that holds the rack. If you don't they have cracked on a lot of drag only cars.

That piece really interests me. I would be curious if the little bit of weight savings you get would be worth it.

The conveniece of NOT having that huge piece in front of the engine is worth it alone, along with getting rid of the north/south pieces.

In memory of Wendy Pate - Mitsu-Media
For anyone who hasn't been following Wendy Pate passed and they are selling decals in her memory for $5 and 100% of the money is going to the Pate family. Please contribute and pick up one of these decals.