The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Morrison Fabrication

My 1992 AWD Drag Talon build!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

You better get that stuff quick, im going to need my downpipe ceramic coated! :thumb:
Did you get you damn cell phone fixed yet, how am i supose to get ahold of you! Your short throw shifters done also. Craig put one in my car and it feels so lovely.


As long as it will fit in a 2ftx2ft oven, My dp is going to be 2 peices so it should fit. You can get me on my gfs cell, i will have it most of this week and if not leave a message and ill call u back.

I should be getting some ceramic paint and the powder coater in alittle more then a week, when i get paid. I still have to get an oven tho.

Sweet i need to pick that shifter up.
 
Well before you said you weren't selling it but if you are I might just have to come buy it off you after work today. Just let me know as I take it your phone doesn't work.

Yea i wanna sell it now, cause i want get a smaller one. The phone works, Just call the number i gave you if you still have it. You can come pick it up whenever.
 
Lol, Im not worryed about the carpet, its not like it weight much at all. i gotta keep it classy LOL,Im gonna have 2 seats, stock dash, and carpet. But the car will still be light as hell.
 
Thanks dude!:thumb:

How much did that carport thing run you? I should get me one of those.
about 170$ from harbor freigt, pepboys has bigger ones for about 200 somthin.

nice work man:thumb:

Thankssss.

Anywayss.....
Manifold came in today, I threw some bolts on and test fit it in place. I still need to get a weld flange for the wastegate and weld it on, and order the real deal ceramic paint to coat it black.:cool: Its good to see my engine bay finally coming together.:D

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
Thanks dude!:thumb:


about 170$ from harbor freigt, pepboys has bigger ones for about 200 somthin.



Thankssss.

Anywayss.....
Manifold came in today, I threw some bolts on and test fit it in place. I still need to get a weld flange for the wastegate and weld it on, and order the real deal ceramic paint to coat it black.:cool: Its good to see my engine bay finally coming together.:D

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.






Black beauty:thumb:
 
Holy crap man that intake mani is freaking HUGE!!! I mean I've seen pics of one and all but it's hard to tell exactly how big it is until you see it on the motor and can look at it from the side, comparing the inlets of the mani and the turbo. I could just imagine the pressure drop from the intercooler and the manifold. That's like trying to pressurize the inside of a bus. Lol.

Regardless though, nice build but I'd imagine it'd be laggy as hell. I'd imagine anyway.
 
hey jay, how close is your compressor outlet to the front cross member there? Its hard to tell even though im sure you will have enough room compared to me.
 
hey jay, how close is your compressor outlet to the front cross member there? Its hard to tell even though im sure you will have enough room compared to me.

From the one angle you can see he has a good bit amount of room. The problem is we all have v-band outlets so we you can't just weld a 90* elbow on because you would have to come down then have a elbow and you would take up extra 2" easy but v-band outlet is where it's at. I know carver's doing it but I just don't trust not having a front roll stop. I think that's the most important one to me followed close by the rear obviously. I figure with my manifold Jake ran it with a tubular front bar and small radiator I should be able to do the same.
 
nice build, i plan on doing that to my talon sometime soon. but this economy is killing me right now
 
Made my downpipe!

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.



Slippi84 I shaved it myself and had someone tig the bungs on.

Steve I have plenty of room, i need to get ahold of you but i have no minutes on my phone.
 
did you drill the holes on the valve cover your self or did you have the guy do it for you? btw real nice dp ho long did it take you to do that?
 
did you drill the holes on the valve cover your self or did you have the guy do it for you? btw real nice dp ho long did it take you to do that?

Did everything except weld the bungs. Yea i drilled the holes etc.


Keep up the good work, I'm anxious to see this come together.

Thanks man!
 
Made my downpipe!

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.



Slippi84 I shaved it myself and had someone tig the bungs on.

Steve I have plenty of room, i need to get ahold of you but i have no minutes on my phone.

Looks good man What you doing transmission wise? You should hit up craig he has two built dogbox tranys
 
Only problem with that is, one is our friend Todds, and the other one is mine LOL.

LOL didn't know you were picking up one of those even though it's right up your alley. By the way thanks for the in with the shifter because when I went I saw he had a PTT that has my name written all over it :hellyeah:

Get rid of that dam rear wiper blade and that decal on your back window already man you can't have a 800+whp monster sporting HS kid stuff LOL
 
Trans wise i will be running a dogboxracing trans, im hoping to maybe get one when i get my income tax return! Theres so many parts i still need its hard to pick what to get next. hopefully Trans, clutch, flywheel, But then again i still need to get cams and springs&retainers, cam gears. Ehhhhh i need some damn money! Im so close yet so far!
 
Trans wise i will be running a dogboxracing trans, im hoping to maybe get one when i get my income tax return! Theres so many parts i still need its hard to pick what to get next. hopefully Trans, clutch, flywheel, But then again i still need to get cams and springs&retainers, cam gears. Ehhhhh i need some damn money! Im so close yet so far!

Your preaching to the choir man LOL. My build is so close yet so far. We def gotta finish before it gets nice so we can go bike hunting and your def coming to the shoot out :rocks::hellyeah:
 
LOL didn't know you were picking up one of those even though it's right up your alley. By the way thanks for the in with the shifter because when I went I saw he had a PTT that has my name written all over it :hellyeah:

Get rid of that dam rear wiper blade and that decal on your back window already man you can't have a 800+whp monster sporting HS kid stuff LOL

Oh im going to put some "streetglow" stickers on it, maybe some neon windshield washer squirters also. BIG PIMPING.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top