The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support STM Tuned

[RESOLVED] ever heard of a 2.9L stroker?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

akira235

10+ Year Contributor
386
5
Oct 16, 2008
c, D.C.
from what i have guessed, and heard, its a 2.4L with a crank from a different engine that has been cut down. I'm wondering if anyone knows ANYTHING about this, or could point me in the direction of someone who does. i KNOW it exists, but I can't find any information on it except for what i remember of a thread somewhere

Post1: information detailing the engine, how you do it, what is required

Mod: "SHHHHHH..."

shortly there after the thread was deleted. I don't know which site it was on, whether it was this one or another one. conspiracy?

I apologize if this is in the wrong section, I couldn't decide if i should put it here or in the hangout.
 
I heard about this along time ago somewhere too. The same guy made a 2.4,2.7? and 2.9. They were expensive too, like 5,000 or 6,000 sounded like only a couple where made too.
 
If it was in fact a 4G block it would have to have a rediculous 120mm stroke. Screw that. The engine would rev like crap. 120mm = 4.7 inches, which is more stroke than a Chevy big block V8. It's almost as long as the rod itself.
 
I remember engines up to like 2.7 being sold.
max bore+max storke+offset grind the crank for all the rods.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top