4nturbo
Probationary Member
- 26
- 0
- Jun 1, 2003
-
York,
Pennsylvania
Ok I have a few questions on your pin out you have pin 78 empty 2Gs don't use that pin but the EVO 8 ECU has pin 78 for the knock sensor imput so is the evo8 ecu not getting a knock signal with your set up? Also pin 43 on 2g is eng/trans toqure reduction request signal 2 witch becomes clutch position input signal on evo8 ecu. Looking at the 2G pin out I see pin 7 (empty on evo8 ecu) is toqure reduction request signal 1 and pin 43 is toqure reduction request signal 2 seeing as how the 2G knock sensor has 2 wires could 1 of these 2 wires need to be hooked up to pin 78 for knock sensor input. toqure reduction request signal sounds like eng. is knocking pull timming to me and thats what a knock sensor does ? just a thought.
I plan to do this swap very soon as I have a good friend with an evo8 who has an extra ecu hes going to give me as in free my car is a 2G automatic so Im going to delete pin 91 witch is used for park/netrual switch only used on automatic cars. he also has everything needed to do the reflase and does all his own tunning on his Evo.
Thanks for the info in your write-up as it helped me decide to do this swap I hope to get this ECU swap to work in my Automatic car with in the next few weeks
I plan to do this swap very soon as I have a good friend with an evo8 who has an extra ecu hes going to give me as in free my car is a 2G automatic so Im going to delete pin 91 witch is used for park/netrual switch only used on automatic cars. he also has everything needed to do the reflase and does all his own tunning on his Evo.
Thanks for the info in your write-up as it helped me decide to do this swap I hope to get this ECU swap to work in my Automatic car with in the next few weeks