psycho said:

Tranny- new output shaft seals and use the MTX dodge lube. (like $15 a quart)
Rear tranny mount bracket (should come still on the tranny)
Manual ECU (same year as your engine)
Modular clutch and throwout bearing
Flywheel-dont know for sure but I had one so I used it.
Bolts from the flywheel to the crank (they are shorter) & possibly the ones from the flywheel to clutch.
Clutch pedal & brake pedal
Clutch master cylinder and slave cylinder
Hydralic lines. (recomend getting the complete hydralic system from the doaner car and mabye replacing any crapy lines.
Shifter/linkage
Bolts for the shifter (4) I found some that worked.
shifter boot

You do not need the axles. The old ones will work.

Click to expand...